21 Great Micrometer Heads

30 Apr 2017

Mitutoyo 164 164 Digital Micrometer Head 2

Mitutoyo 164 164 Digital Micrometer Head 2
Mitutoyo 164 164 Digital Micrometer Head 2

Mitutoyo 164 164 Digital Micrometer Head 2. The display can be rotated up to 330 degrees for easy reading in ay position. With SPC Data Output. 2 In / 50.8 mm, 0005 In / 0.01 mm, Digimatic Micrometer Head, With SPC Data Output, 330 Degree Rotating Face.

Fowler Full Warranty EZ Read Digital Micrometer Head 4 92 Overall Length 52 222 708

Fowler Full Warranty EZ Read Digital Micrometer Head 4 92 Overall Length 52 222 708
Fowler Full Warranty EZ Read Digital Micrometer Head 4 92 Overall Length 52 222 708

Fowler Full Warranty EZ Read Digital Micrometer Head 4 92 Overall Length 52 222 708. The Ultima system requires connection to a Sylvac or multiplexer display unit. This product has 1 year warranty offered by Fowler High Precision. 1 year warranty offered by Fowler High Precision. It uses a three-point system for the detection of lobing or triangular form and ceramic points provide high durability and stability with regard to thermal expansion. The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27", and is accurate to or - 0.00006". Resolution is 0.00001", and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's Fast Fit measuring heads for rapid measurement.

Stanley Proto J6014CX 1 2 Inch Drive Ratcheting Head Micrometer Torque Wrench 50 250 Feet Pound

Stanley Proto J6014CX 1 2 Inch Drive Ratcheting Head Micrometer Torque Wrench 50 250 Feet Pound
Stanley Proto J6014CX 1 2 Inch Drive Ratcheting Head Micrometer Torque Wrench 50 250 Feet Pound

Stanley Proto J6014CX 1 2 Inch Drive Ratcheting Head Micrometer Torque Wrench 50 250 Feet Pound. Calibrated to /- 3% in clockwise direction and /- 6% counter clockwise direction. Manufactured to meet precision / highly accurate applications such as military and aerospace. Calibration is accomplished by mechanical loading each wrench in a horizontal position. Calibration is accomplished by mechanical loading each wrench in a horizontal position and performing a three test at 20% 60% and 100% of maximum instrument capacity. lbs Calibrated to /- 3% in clockwise direction and /- 6% counter clockwise direction. Stanley J 6014 CX Proto 1 / 2-inch Drive Ratcheting Head Micrometer Torque Wrench 50-250 ft.

Mitutoyo 250 301 Micrometer Head With Digit Counter 0 25Mm Range 0 01Mm Graduation 0 002Mm Accuracy Ratchet Stop Thimble Flat Face

Mitutoyo 250 301 Micrometer Head With Digit Counter 0 25Mm Range 0 01Mm Graduation 0 002Mm Accuracy Ratchet Stop Thimble Flat Face
Mitutoyo 250 301 Micrometer Head With Digit Counter 0 25Mm Range 0 01Mm Graduation 0 002Mm Accuracy Ratchet Stop Thimble Flat Face

Mitutoyo 250 301 Micrometer Head With Digit Counter 0 25Mm Range 0 01Mm Graduation 0 002Mm Accuracy Ratchet Stop Thimble Flat Face. Carbide tipped measuring face. Ratchet Stop for constant force. Plain stem, carbide tip spindle face, when retracting the spindle until its stroke end, scale surface: hard chrome plating. Digit counter for easy reading of spindle movement.

BQLZR Silver Round Needle Type Thread Micrometer Head Measurement Measure Tool 0 25Mm Range

BQLZR Silver Round Needle Type Thread Micrometer Head Measurement Measure Tool 0 25Mm Range
BQLZR Silver Round Needle Type Thread Micrometer Head Measurement Measure Tool 0 25Mm Range

BQLZR Silver Round Needle Type Thread Micrometer Head Measurement Measure Tool 0 25Mm Range. The semiconductor manufacturing equipment and inspection associated evaluation device. An optical fiber positioning, optical communication system products and testing equipment. Head are Highly precision available. The color of the item may vary slightly due to photography and your own computer Feature: Suitable For: Optical instrumentation platform displacement amount of the fine adjustment For XY table suitable for fine adjustment of a variety of precision instruments, and measuring equipment LCD production and testing equipment The liquid crystal prism camera positioning and loading. TRENDnet USB to Serial Converter, USB 1.1 to RS-232 Male (9-pin) DB 9 Serial Cable, Prolific Chipset, Windows 10 / 8.1 / 8/7, Mac OS X 10.6 and Above, 26 inch length, TU-S 9. used for machine tools, fixtures, special measuring tools and other equipment adjustable micrometer precision parts need to have a place 8 DVD, MD, CD-related CD read and write optical pickup lens production and testing equipment Material: Metal Color: Silver Range: 0-25 mm Needle type: Round Accuracy: 0.01 mm Dimension: 116 x 18 mm / 4.57 x 0.71", (L x Dia) Weight: 120 g 1 x Micrometer Head Measurement. Used for machine tools, fixtures, special measuring tools and other equipment adjustable micrometer precision parts need to have a place 8 DVD, MD, CD-related CD read and write optical pickup lens production and testing equipment.

Stanley Proto J6013C 1 2 Inch Drive Fixed Head Micrometer Torque Wrench 50 250 Feet Pound

Stanley Proto J6013C 1 2 Inch Drive Fixed Head Micrometer Torque Wrench 50 250 Feet Pound
Stanley Proto J6013C 1 2 Inch Drive Fixed Head Micrometer Torque Wrench 50 250 Feet Pound

Stanley Proto J6013C 1 2 Inch Drive Fixed Head Micrometer Torque Wrench 50 250 Feet Pound. Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance. Calibrated to /- 3% in clockwise direction and /- 6% counter clockwise direction at 20% to 100% of full scale. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. Calibration is accomplished by manual loading the torque wrenches. Stanley Proto J 6014 C 1 / 2-Inch Drive Ratcheting Head Micrometer Torque Wrench, 50-250-Feet Pound. Stanley J 6013 C Proto 1 / 2-inch Drive Fixed Head Micrometer Torque Wrench 50-250 ft-lbs Calibrated to /- 3% in clockwise direction and /- 6% counter clockwise direction at 20% to 100% of full scale.

Mitutoyo 148 343 Micrometer Head 0 1Mm Rev 0 6 5Mm Range 0 002Mm Graduation 0 002Mm Accuracy Plain Thimble Clamp Nut Spherical SR4 Face Thicker Shorter Thimble

Mitutoyo 148 343 Micrometer Head 0 1Mm Rev 0 6 5Mm Range 0 002Mm Graduation 0 002Mm Accuracy Plain Thimble Clamp Nut Spherical SR4 Face Thicker Shorter Thimble
Mitutoyo 148 343 Micrometer Head 0 1Mm Rev 0 6 5Mm Range 0 002Mm Graduation 0 002Mm Accuracy Plain Thimble Clamp Nut Spherical SR4 Face Thicker Shorter Thimble

Mitutoyo 148 343 Micrometer Head 0 1Mm Rev 0 6 5Mm Range 0 002Mm Graduation 0 002Mm Accuracy Plain Thimble Clamp Nut Spherical SR4 Face Thicker Shorter Thimble. Micrometers are typically used in manufacturing, machining, and mechanical engineering. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL. Available with plain or clamp-nut stem for mounting in a fixture. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. Satin chrome finish helps resist rust and reduce glare. Lapped measuring face helps provide accuracy. The vernier scale is graduated to 0.01 mm, and has a satin chrome rust- and glare-resistant finish. The spherical measuring face is lapped to help provide accuracy. There are three types of micrometer: outside, inside, and depth. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. Spindle travel of 0.1 mm per revolution for fine adjustment. The Mitutoyo 148 series fine spindle feeding micrometer head has a vernier scale in metric units for taking precise measurements and spindle travel of 0.1 mm per revolution for fine adjustment. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds. Vernier scale in metric units for taking precise measurements.

Starrett 363L Digital Micrometer Head 0 1 Range 0 001 Graduation 0 0001 Accuracy Plain Thimble Lock Nut

Starrett 363L Digital Micrometer Head 0 1 Range 0 001 Graduation 0 0001 Accuracy Plain Thimble Lock Nut
Starrett 363L Digital Micrometer Head 0 1 Range 0 001 Graduation 0 0001 Accuracy Plain Thimble Lock Nut

Starrett 363L Digital Micrometer Head 0 1 Range 0 001 Graduation 0 0001 Accuracy Plain Thimble Lock Nut. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. Micro-lapped measuring face helps provide accuracy. There are three types of micrometer: outside, inside, and depth. Hardened steel spindle to help provide durability. Micrometers are typically used in manufacturing, machining, and mechanical engineering. The micrometer is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The company was founded in 1880 and is headquartered in Athol, MA. Satin chrome finish helps resist rust and reduce glare. The micrometer has a satin chrome rust- and glare-resistant finish. The Starrett 363 series digital micrometer head has a mechanical digit counter in inch units for ease of reading to 0.001", and a knurled ring-type lock nut to hold measurements in place. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds. Mechanical digit counter for ease of reading to 0.001". Knurled ring-type lock nut to hold measurements in place.

MP T60XY 13L XY Linear Translation Stage 13Mm Range In Both X Y Stage Micrometer Head Actuators In A 0 01 Mm Resolution

MP T60XY 13L XY Linear Translation Stage 13Mm Range In Both X Y Stage Micrometer Head Actuators In A 0 01 Mm Resolution
MP T60XY 13L XY Linear Translation Stage 13Mm Range In Both X Y Stage Micrometer Head Actuators In A 0 01 Mm Resolution

MP T60XY 13L XY Linear Translation Stage 13Mm Range In Both X Y Stage Micrometer Head Actuators In A 0 01 Mm Resolution. 0 - 13 mm travel with an 10 micrometer resolution. Support loading ups to 5 kgs. Multipile positioners can be set up in XY, XZ or XYZ orientation. It is easy to set up an XYZ system by our Right Angle Bracket T 60 or our Vertical Translation Stage T 60 Z-10 A, T 60 Z-10 B. The model, T 60 XY-13 L, XY Linear Translation Stage, features crossed-roller bearing guide for precise linear motion and stable performance over the entire 13 mm travel range. Micrometer Head drives in left-handed configuration with an 10 micrometer resolution, and supporting loads up to 5.0 kg. Cross roller bearing for precise linear motion control.

SK Hand Tool SKT0787 Interchangeable Head Micrometer Click Type Torque Wrench 40 200 Nm

SK Hand Tool SKT0787 Interchangeable Head Micrometer Click Type Torque Wrench 40 200 Nm
SK Hand Tool SKT0787 Interchangeable Head Micrometer Click Type Torque Wrench 40 200 Nm

SK Hand Tool SKT0787 Interchangeable Head Micrometer Click Type Torque Wrench 40 200 Nm. Accuracy of /- 4% meets or exceeds ASME B 107.14 M and ISO 6789, offering consistent assembly quality. Comes with free ISO / IEC 17025 calibration certificate. Wrenches are perfect for line applications where frequent torque value and head configuration changes are required. Extremely versatile system permits use of fewer wrenches by connecting to a wide range of standard interchangeable heads, extensions and adapters. These tools offer the incredible versatility of micrometer torque adjustment with the strength and rigidity advantages of interchangeable heads.

Proto 6020AB 3 4 Drive 90 600 Foot Pound Ratchet Head Micrometer Torque Wrench

Proto 6020AB 3 4 Drive 90 600 Foot Pound Ratchet Head Micrometer Torque Wrench
Proto 6020AB 3 4 Drive 90 600 Foot Pound Ratchet Head Micrometer Torque Wrench

Proto 6020AB 3 4 Drive 90 600 Foot Pound Ratchet Head Micrometer Torque Wrench. 90-600 foot per pound torque range. A product line that ranges from easy-to-use Micrometer, or style Torque Wrenches, Dial Torque Wrenches and Torque Screwdrivers to full-featured electronic Torque Multipliers and Torque Te. 142-834 Newton Meters torque range. Proto offers a broad range of professional torque products. This Foot Pound Torque Wrench has a ratchet head and a 3 / 4", drive size.

Mitutoyo 293 345 Digital Outside Micrometer Inch Metric Ratchet Thimble 1 2 25 4 50 8Mm Range 0 00005 0 001Mm Resolution 0 00005 Accuracy Meets IP65

Mitutoyo 293 345 Digital Outside Micrometer Inch Metric Ratchet Thimble 1 2 25 4 50 8Mm Range 0 00005 0 001Mm Resolution 0 00005 Accuracy Meets IP65
Mitutoyo 293 345 Digital Outside Micrometer Inch Metric Ratchet Thimble 1 2 25 4 50 8Mm Range 0 00005 0 001Mm Resolution 0 00005 Accuracy Meets IP65

Mitutoyo 293 345 Digital Outside Micrometer Inch Metric Ratchet Thimble 1 2 25 4 50 8Mm Range 0 00005 0 001Mm Resolution 0 00005 Accuracy Meets IP65. Functions offered by this model origin point setting, zero setting, hold, automatic on and off after 20 minutes of idle time, function lock, and an alarm in case of computing or low-voltage. Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. Mitutoyo 293-345 micrometer SR-44 battery Reference standard bar Plastic case. Ingress Protection certified IP 65 for protection against dust and water. It has a battery life of approximately 1.2 years of normal use. Micrometers are typically used in manufacturing, machining, and mechanical engineering. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL. There are three types of micrometer: outside, inside, and depth. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. The micrometer's plastic components are oil-resistant and measuring faces are carbide-tipped for durability. This gauge is Ingress Protection certified IP 65 for protection against dust and water. Mitutoyo 500-196-30 CAL Absolute Advanced Onsite Sensor (AOS) Digital Caliper with Calibration, Inch / Metric, 0-6", Range, 0.0005", Resolution, 0.001", Accuracy. Mitutoyo 293-340-30 Digital Micrometer, Inch / Metric, Ratchet Thimble, 0-1", (0-25 mm) Range, 0.00005", (0.001 mm) Resolution, 0.00005", Accuracy, Meets IP 65. The micrometer has a measurement range of 1 to 2", (25.4 to 50.8 mm), resolution of 0.00005", (0.001 mm), and an accuracy of or - 0.00005". The LCD screen displays in inches and metric units. A ratchet thimble helps provide uniform pressure for precise, repeatable measurements. This unit comes with an SR-44 battery, standard bar for reference, and a fitted, plastic type LCD displays in both inches and metric units Anvil / spindle style Flat measuring faces, carbide tipped Range 1 to 2", (25.4 to 50.8 mm) Resolution 0.00005", (0.001 mm) Accuracy or - 0.00005", Parallelism 0.00004", (0.001 mm) Thimble style Ratchet thimble Data output No Dimensions 158.7 mm length and 59.8 mm width Weight 335 g Standards IP 65 Power source SR-44 battery Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer measures 1.0 to 2.0", (25.4 to 50.8 mm) with 0.00005", (0.001 mm) resolution and or - 0.00005", accuracy, for taking outside diameter measurements in harsh conditions. LCD screen displays in inches and metric units. Ratchet thimble to help provide uniform pressure for precise, repeatable measurements.

Stanley Proto J6005C 3 8 Inch Drive Fixed Head Micrometer Torque Wrench 16 80 Feet Pound

Stanley Proto J6005C 3 8 Inch Drive Fixed Head Micrometer Torque Wrench 16 80 Feet Pound
Stanley Proto J6005C 3 8 Inch Drive Fixed Head Micrometer Torque Wrench 16 80 Feet Pound

Stanley Proto J6005C 3 8 Inch Drive Fixed Head Micrometer Torque Wrench 16 80 Feet Pound. Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. Calibration is accomplished by manual loading the torque wrenches. Calibrated to /- 3% in clockwise direction and /- 6% counter clockwise direction at 20% to 100% of full scale. Stanley J 6005 C Proto 3 / 8-inch Drive Fixed Head Micrometer Torque Wrench 16-80 ft-lbs Calibrated to /- 3% in clockwise direction and /- 6% counter clockwise direction at 20% to 100% of full scale.

Starrett 762XFL Digital Micrometer Head Non Rotating Spindle 0 1 Range 0 00005 Graduation 0 0001 Accuracy Friction Thimble Lock Nut Carbide Face

Starrett 762XFL Digital Micrometer Head Non Rotating Spindle 0 1 Range 0 00005 Graduation 0 0001 Accuracy Friction Thimble Lock Nut Carbide Face
Starrett 762XFL Digital Micrometer Head Non Rotating Spindle 0 1 Range 0 00005 Graduation 0 0001 Accuracy Friction Thimble Lock Nut Carbide Face

Starrett 762XFL Digital Micrometer Head Non Rotating Spindle 0 1 Range 0 00005 Graduation 0 0001 Accuracy Friction Thimble Lock Nut Carbide Face. The company was founded in 1880 and is headquartered in Athol, MA. Micro-lapped carbide measuring face helps provide accuracy and wear resistance. There are three types of micrometer: outside, inside, and depth. Micrometers are typically used in manufacturing, machining, and mechanical engineering. It has a plain stem for mounting in a fixture with a split-body clamp or setscrew. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The micrometer is available with a non-rotating spindle to help prevent wear on the workpiece. Statistical Process Control (SPC) output transmits results to a computer or external device through an interface cable separately). The micrometer has Statistical Process Control (SPC) data output to transmit results to a computer or external device. It also has a preset to install a reading at any position. The Starrett digital micrometer head has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005", (0.001 mm), a vernier scale graduated in inch units, and a knurled ring-type lock nut to hold measurements in place. The micrometer has a flat measuring face for measurement or use as a stop, and is carbide-tipped for wear resistance and micro-lapped to help provide accuracy. The micrometer s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and to a true zero reading. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds. Digital, single-value readout LCD displays in inch and metric units for readability. Knurled ring-type lock nut to hold measurements in place. Flat measuring face for measurement or use as a stop.

Mitutoyo 148 216 Miniature Micrometer Head 0 5Mm Range 0 02Mm Graduation 0 005Mm Accuracy Plain Thimble Clamp Nut Spherical SR1 5 Face

Mitutoyo 148 216 Miniature Micrometer Head 0 5Mm Range 0 02Mm Graduation 0 005Mm Accuracy Plain Thimble Clamp Nut Spherical SR1 5 Face
Mitutoyo 148 216 Miniature Micrometer Head 0 5Mm Range 0 02Mm Graduation 0 005Mm Accuracy Plain Thimble Clamp Nut Spherical SR1 5 Face

Mitutoyo 148 216 Miniature Micrometer Head 0 5Mm Range 0 02Mm Graduation 0 005Mm Accuracy Plain Thimble Clamp Nut Spherical SR1 5 Face. Lapped measuring face helps provide accuracy. The measuring face is lapped to help provide accuracy. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL. There are three types of micrometer: outside, inside, and depth. Available with plain or clamp-nut stem for mounting in a fixture. The vernier scale is graduated to 0.01 mm, and has a satin chrome rust- and glare-resistant finish. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. Micrometers are typically used in manufacturing, machining, and mechanical engineering. Satin chrome finish helps resist rust and reduce glare. The Mitutoyo 148 series miniature micrometer head has an ultra-small size and a vernier scale in metric units for taking precise measurements to 6.5 mm. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds. Vernier scale in metric units for taking precise measurements. Miniature size for measurements to 6.5 mm.

BQLZR Silver Range 0 13Mm Round Needle Type Measure Tool Knurled Adjustment Knob Micrometer Head Measurement

BQLZR Silver Range 0 13Mm Round Needle Type Measure Tool Knurled Adjustment Knob Micrometer Head Measurement
BQLZR Silver Range 0 13Mm Round Needle Type Measure Tool Knurled Adjustment Knob Micrometer Head Measurement

BQLZR Silver Range 0 13Mm Round Needle Type Measure Tool Knurled Adjustment Knob Micrometer Head Measurement. An optical fiber positioning, optical communication system products and testing equipment. LCD production and testing equipment. Head are Highly precision available. The semiconductor manufacturing equipment and inspection associated evaluation device. Needle Type: Round. For XY table suitable for fine adjustment of a variety of precision instruments, and measuring equipment. The liquid crystal prism camera positioning and loading. The color of the item may vary slightly due to photography and your own computer Feature: Suitable For: Optical instrumentation platform displacement amount of the fine adjustment. Used for machine tools, fixtures, special measuring tools and other equipment adjustable micrometer precision parts need to have a place 8 DVD, MD, CD-related CD read and write optical pickup lens production and testing equipment. Material: Metal Color: Silver Product Range: 0-13 mm Needle Type: Round Accuracy: 0.01 mm Dimension: 19 x 64 mm / 0.75 x 2.52", (Dia x L) Weight: 37 g 1 x Micrometer Head Measure Tool. Used for machine tools, fixtures, special measuring tools and other equipment adjustable micrometer precision parts need to have a place 8 DVD, MD, CD-related CD read and write optical pickup lens production and testing equipment. Dimension: 19 x 64 mm / 0.75 x 2.52", (Dia x L).

Stanley Proto J6015C 1 2 Inch Drive Fixed Head Micrometer Torque Wrench 30 150 Feet Pound

Stanley Proto J6015C 1 2 Inch Drive Fixed Head Micrometer Torque Wrench 30 150 Feet Pound
Stanley Proto J6015C 1 2 Inch Drive Fixed Head Micrometer Torque Wrench 30 150 Feet Pound

Stanley Proto J6015C 1 2 Inch Drive Fixed Head Micrometer Torque Wrench 30 150 Feet Pound. Calibrated to /- 3% in clockwise direction and /- 6% counter clockwise direction at 20% to 100% of full scale. Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. Stanley J 6015 C Proto 1 / 2-inch Drive Fixed Head Micrometer Torque Wrench 30-150 ft-lbs Calibrated to /- 3% in clockwise direction and /- 6% counter clockwise direction at 20% to 100% of full scale.

Mitutoyo 250 312 Micrometer Head With Digit Counter 0 1 Range 0 0001 Graduation 0 0001 Accuracy Ratchet Stop Thimble Flat Face

Mitutoyo 250 312 Micrometer Head With Digit Counter 0 1 Range 0 0001 Graduation 0 0001 Accuracy Ratchet Stop Thimble Flat Face
Mitutoyo 250 312 Micrometer Head With Digit Counter 0 1 Range 0 0001 Graduation 0 0001 Accuracy Ratchet Stop Thimble Flat Face

Mitutoyo 250 312 Micrometer Head With Digit Counter 0 1 Range 0 0001 Graduation 0 0001 Accuracy Ratchet Stop Thimble Flat Face. Ratchet Stop for constant force. Carbide tipped measuring face. Digit counter for easy reading of spindle movement. Plain stem, carbide tip spindle face, when retracting the spindle until its stroke end, scale surface: hard chrome plating.

SK Hand Tool SKT0771 Interchangeable Head Micrometer Click Type Torque Wrench 30 150 Feet Pound

SK Hand Tool SKT0771 Interchangeable Head Micrometer Click Type Torque Wrench 30 150 Feet Pound
SK Hand Tool SKT0771 Interchangeable Head Micrometer Click Type Torque Wrench 30 150 Feet Pound

SK Hand Tool SKT0771 Interchangeable Head Micrometer Click Type Torque Wrench 30 150 Feet Pound. Comes with free ISO / IEC 17025 calibration certificate. Wrenches are perfect for line applications where frequent torque value and head configuration changes are required. Accuracy of /- 4% meets or exceeds ASME B 107.14 M and ISO 6789, offering consistent assembly quality. These tools offer the incredible versatility of micrometer torque adjustment with the strength and rigidity advantages of interchangeable heads. Extremely versatile system permits use of fewer wrenches by connecting to a wide range of standard interchangeable heads, extensions and adapters.

Stanley Proto J6016C 1 2 Inch Drive Ratcheting Head Micrometer Torque Wrench 30 150 Feet Pound

Stanley Proto J6016C 1 2 Inch Drive Ratcheting Head Micrometer Torque Wrench 30 150 Feet Pound
Stanley Proto J6016C 1 2 Inch Drive Ratcheting Head Micrometer Torque Wrench 30 150 Feet Pound

Stanley Proto J6016C 1 2 Inch Drive Ratcheting Head Micrometer Torque Wrench 30 150 Feet Pound. Calibrated to /- 3% clockwise direction and /- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. lbs Calibrated to /- 3% clockwise direction and /- 6% counter clockwise at 20% to 100% of full scale. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. Fluke TL 1550 B 3 Piece Test Lead Set with Alligator Clips, 5000 V DC Voltage, 20 A Current, 103-25 / 128", Cable Length. Stanley Proto J 6064 C 3 / 8-Inch Drive Ratcheting Head Micrometer Torque Wrench, 40-200-Inch Pound. Stanley Proto J 6064 RK 3 / 8-Inch Drive Ratchet Head Repair Kit - Torque Wrench. Stanley Proto J 6006 C 3 / 8-Inch Drive Ratcheting Head Micrometer Torque Wrench, 16-80-Feet Pound. Stanley Proto J 6014 C 1 / 2-Inch Drive Ratcheting Head Micrometer Torque Wrench, 50-250-Feet Pound. Stanley Proto J 6012 C 3 / 8-Inch Drive Ratcheting Head Micrometer Torque Wrench, 20-100-Feet Pound. Stanley Proto J 6062 C 1 / 4-Inch Drive Ratcheting Head Micrometer Torque Wrench, 40-200-Inch Pound. Stanley J 6016 C Proto 1 / 2-inch Drive Ratcheting Head Micrometer Torque Wrench 30-150 ft.

Panavise 385 Micrometer Head

Panavise 385 Micrometer Head
Panavise 385 Micrometer Head

Panavise 385 Micrometer Head. Pana Vise's Tilt, Turn Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! Compatible with all 300 series Bases. This Head gently, yet firmly, holds micrometers of all sizes, in addition to small circuit boards and other items. All Pana Vise Products are covered by a Limited Lifetime Warranty! Limited Lifetime Warranty! Introducing the Panavise 385 MICROMETER HEAD, Hold a micrometer or small item exactly where YOU want it! Hold a micrometer or small item exactly where YOU want it! Height (shaft to top of jaws), 3.14 (79.8 mm), Weight: 0.23 lbs. Pana Vise is a major manufacture of Vises and Work Holding Tools. Pana Vise 303 Standard Head. Pana Vise 203 Pv Jr. Pana Vise 353 Plated Steel Jaws (pair) for 301, 303, 304 And 381 w / screws. Vise Head With 5 / 8 Inch Shaft For 300 Series Bases. Pana Vise 354 Brass Jaws (pair) for 301, 303, 304 And 381 w / screws. Pana Vise 308 Weighted Base Mount. Pana Vise 305 Low Profile Base. Pana Vise 344 Grooved Nylon Jaws (pair) for 301, 303, 304 And 381 w / screws. Pana Vise 337 Fixturing Head. Pana Vise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws). Pana Vise 312 Tray Base Mount. Delrin pads open 0.5-Inch (12.7 mm) and close to zero for holding thin items. Throat depth: 0.95-Inch (24.1 mm). Delrin pads open 0.5-Inch (12.7 mm) and close to zero for holding thin items. Throat depth: 0.95-Inch (24.1 mm), Height (shaft to top of jaws), 3.14 (79.8 mm), Weight: 0.23 lbs.