22 Top Material Lifts

5 May 2017

Vestil A LIFT R Fixed Straddle Hand Winch Lift Truck 35 Length 25 Width 67 1 2 Height 500 Lbs Capacity

Vestil A LIFT R Fixed Straddle Hand Winch Lift Truck 35 Length 25 Width 67 1 2 Height 500 Lbs Capacity
Vestil A LIFT R Fixed Straddle Hand Winch Lift Truck 35 Length 25 Width 67 1 2 Height 500 Lbs Capacity

Vestil A LIFT R Fixed Straddle Hand Winch Lift Truck 35 Length 25 Width 67 1 2 Height 500 Lbs Capacity. Material lifts typically comprise a vertical metal frame and two forks that can support a pallet of goods and that can be raised or lowered to an optimal, ergonomic height for loading or unloading. Vestil manufactures materials handling equipment, including hoists and trolleys, jib and gantry cranes, loading dock equipment, and storage solutions. Hold-down device secures carriage during transport. This material lift has a load capacity of 500 lb. Wheels allow the material lift to be rolled for moving materials. A pivoting latch secures the fork carriage for transport. The forks may be controlled with a hand crank or a foot pump, and they can sometimes be inverted to adjust the service range. The company, founded in 1968, is headquartered in Angola, IN. The forks can be inverted to adjust the service range. A foot brake keeps the lift truck from rolling. This product is intended for use in professional and industrial environments. Two loading wheels near the top of the frame allow the lift truck to be loaded into a truck bed for transport. Lightweight portable lifts are great for hundreds of applications. Counterbalance weight design keeps unit from tipping with heavy loads. The Vestil A-LIFT-R standard hand winch lift truck can be used to transport a pallet of goods, and it has a steel and aluminum frame, a hand-crank winch, six wheels, and two steel forks that can be raised or lowered to an optimal height for loading or unloading. The hand-crank winch has a reversible handle that can be used to raise or lower the forks by 1 inch with each complete revolution. The two front wheels measure 2 inches in diameter and swivel for maneuverability. The two rear wheels measure 8 inches in diameter. and measures 68 x 24 x 35 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) It has a service range of 23-1 / 2 to 68-7 / 8 inches high with the forks up and 3-1 / 2 to 47-1 / 4 inches high with the forks down. Each fork measures 1-3 / 4 x 4 x 22 inches (H x W x D). The width between the forks is 13 inches. The outside fork width is 21-1 / 2 inches. Manual cable winch easily raises and lowers forks.

Genie Lift GL 8 Heavy Duty Aluminum Manual Lift 400 Lbs Load Capacity Lift Height 10 0 5

Genie Lift GL 8 Heavy Duty Aluminum Manual Lift 400 Lbs Load Capacity Lift Height 10 0 5
Genie Lift GL 8 Heavy Duty Aluminum Manual Lift 400 Lbs Load Capacity Lift Height 10 0 5

Genie Lift GL 8 Heavy Duty Aluminum Manual Lift 400 Lbs Load Capacity Lift Height 10 0 5. Genie is headquartered in Redmond, WA, and manufactures a variety of lifts, booms, light towers, and telehandlers. For industrial use only. Compact, maneuverable design. Capacity of 400 lbs (181 kg) for lifting heavy loads. Lift weighs 145 lbs (65.8 kg) for compact and portable transport. Standard steel forks for lifting loads to a maximum height of 10. About Material Lifts Material lifts are used for lifting a variety of loads such as installation of electrical fixtures, ducts, drywall, ceiling panels, and overhead sprinklers, among many others. About Genie Industries Genie Industries, a subsidiary of Terex Corporation, was founded in 1966 with the introduction of the Genie Hoist, a portable pneumatic material lift. The telescoping aluminum frame makes the lift compact and lightweight, while steel forks make the lift more durable. Capacity of 400 lb (181 kg) for lifting heavy loads Lift weighs 145 lbs (65.8 kg) for compact and portable transport Single door access for ease of use The Genie GL-8 is a material lift that can be used as a hand truck, forklift, or dolly. Single door access for ease of use. Telescoping aluminum frame for use as hand truck, forklift, or dolly. Designed for Easy Maneuverability and Storage The lift has a hold-down bar to secure the aluminum mast during transport, and can fit through most standard doorways. Genie 37148 GT Load Platform with Decal for Genie Lift. 5", (3.06 m) maximum lifting height and a 400 lb (181 kg) capacity for lifting and moving heavy items. Protects Flooring with Non-Marking Wheels and Dual Swivel Casters It comes with non-marking 2", (5 cm) dual wheel front swivel casters, and 8", (20 cm) rear wheels for protecting floors when transporting items. Lifting power is provided from a standard winch, which is reversible for compact storage.

Genie Superlift Contractor SLC 18 650 Lbs Load Capacity Lift Height 18 6 Load Transport With Single User

Genie Superlift Contractor SLC 18 650 Lbs Load Capacity Lift Height 18 6 Load Transport With Single User
Genie Superlift Contractor SLC 18 650 Lbs Load Capacity Lift Height 18 6 Load Transport With Single User

Genie Superlift Contractor SLC 18 650 Lbs Load Capacity Lift Height 18 6 Load Transport With Single User. Lightweight telescoping aluminum construction for portability and durability. Genie is headquartered in Redmond, WA, and manufactures a variety of lifts, booms, light towers, and telehandlers. The Superlift has a hold-down bar to secure the aluminum mast during transport, glide rails for easy loading, and can fit through standard doorways. For industrial use only. Lift weighs 307 lbs (139 kg) for applications with weight limitations. About Genie Industries Genie Industries, a subsidiary of Terex Corporation, was founded in 1966 with the introduction of the Genie Hoist, a portable pneumatic material lift. Lightweight telescoping aluminum mast for portable durability. About Material Lifts Material lifts are used for lifting a variety of loads such as installation of electrical fixtures, ducts, drywall, ceiling panels, and overhead sprinklers, among many others. Material lift with steel forks for construction and industrial applications. Capacity of 650 lbs (295 kg) for lifting heavy loads. Genie 33366-SGT Single Fork Extension for Superlift Advantage and Contractor. Terex USA 80679 GT Fork Extension Pin. Genie Hoist, GH-3.8, Portable Lift, 300 lbs Load Capacity, Lift Height 12 (CO 2 Tank Sold Separately). Capacity of 650 lbs (295 kg) for lifting heavy loads Lift weighs 307 lbs (139 kg) for applications with weight limitations Lightweight telescoping aluminum mast for portable durability The Genie SLC-18 Superlift Contractor is a heavy duty material lift for construction and industrial applications with a 18 6", (5.64 m) maximum lifting height and a 650 lbs (295 kg) capacity. Easy Lifting, Loading, and Maneuvering The SLC-18 has a standard base with steel forks for lifting loads up and down, non-marking 4", (10 cm) front casters, 5", (13 cm) rear casters with side breaks, and a rear transport wheel assembly. One-Speed Manual Winch Power is provided from a one-speed manual winch, which requires 8.5 cranks per foot (27.8 cranks per meter). One-speed manual winch for lifting loads to a maximum height of 18 6", (5.64 m).

Raymond Original Mighty King Steel Desk Lift Hard Rubber Wheels 600 Lbs Load Capacity 9 3 4 Height 32 Width X 16 Depth

Raymond Original Mighty King Steel Desk Lift Hard Rubber Wheels 600 Lbs Load Capacity 9 3 4 Height 32 Width X 16 Depth
Raymond Original Mighty King Steel Desk Lift Hard Rubber Wheels 600 Lbs Load Capacity 9 3 4 Height 32 Width X 16 Depth

Raymond Original Mighty King Steel Desk Lift Hard Rubber Wheels 600 Lbs Load Capacity 9 3 4 Height 32 Width X 16 Depth. No need to empty drawers or remove equipment and material from desk tops. Sturdy roller-bearing, non-mar hard rubber casters rotate freely in a 360 degree circle for easy maneuvering. Heavy duty casting and steel caster base, powder coated finish. All Mighty King desk lifts are manufactured and assembled in the USA under rigid quality control standards. Engineered for easy moving of most types of office desks by just one person. Tough non-mar, skid-resistant red vinyl coats the lift frame. In seconds desk can be rolled in any direction. Handle is removable; safety latch automatically locks in raised position with a convenient trip for release. Reduces labor and moving costs; saves time and effort. Simply roll Mighty King desk lift beneath desk, depress handle and elevate desk. Casters: 2-1 / 2", x 1-1 / 8", hard rubber lowered height: 4-1 / 4", raised height: 9-3 / 4", lift frame: 16", x 32".

Sumner 783652 Series 2124 24 Feet Contractor Lift

Sumner 783652 Series 2124 24 Feet Contractor Lift
Sumner 783652 Series 2124 24 Feet Contractor Lift

Sumner 783652 Series 2124 24 Feet Contractor Lift. Reversible forks and plunger pins for quick readjustment and compact storage. Light weight design. Lifts up to 24-Feet. 650-Pound lift capacity. FEATURES: Rolls through standard doorways tail gates Loading Bar - great for overhead cranes Reversible forks Plunger pins for quick readjustment and compact storage No tools needed - no loose parts Variety of attachments Large 7 / 32", (5.5 mm) load cable Lockable, 5", polyurethane casters Load cable feeds inside mast (no more exposed cable just inches away from operator's face) 12, 18 24 heights (4.0 m, 5.6 m, 7.3 m) 650 lb capacity (300 kg).

All Material Handling ML003 05 Mini Lever Chain Hoist 1 4 0 25 Ton 05 Lift

All Material Handling ML003 05 Mini Lever Chain Hoist 1 4 0 25 Ton 05 Lift
All Material Handling ML003 05 Mini Lever Chain Hoist 1 4 0 25 Ton 05 Lift

All Material Handling ML003 05 Mini Lever Chain Hoist 1 4 0 25 Ton 05 Lift. Small size allows operation and storage in tight places. Self adjusting pawl and disc type mechanical load brake insures positive load control. Planetary gearing is used to minimize operator effort and to reduce stress on the brake components. The All Material Handling ML 003-05 mini lever chain hoist small size allows operation and storage in tight places.

Sumner Manufacturing 783702 2020 Material Lift 20 9 3 4 Maximum Height 800 Lb Lifting Capacity

Sumner Manufacturing 783702 2020 Material Lift 20 9 3 4 Maximum Height 800 Lb Lifting Capacity
Sumner Manufacturing 783702 2020 Material Lift 20 9 3 4 Maximum Height 800 Lb Lifting Capacity

Sumner Manufacturing 783702 2020 Material Lift 20 9 3 4 Maximum Height 800 Lb Lifting Capacity. The shorter mast sections allow the 2000 to travel through doorways without tipping and to fit nicely into vehicles with small storage space. Fast action stabilizer legs fold down with ease and lock in place. Sumner's Series 2000 material lifts are built for heavy materials and continuous work. This compact lift offers stronger mast design and a superior cabling system. Cable feeds inside mast, removing exposed cable from near the operator's face. Sumner-built highly reliable single-speed winch. Lockable 5", casters - hard tread urethane wheels with Delrin bearings. 10", rough terrain wheels makes loading a truck or van hassle free.

Sumner Manufacturing 783701 2015 Material Lift 16 2 1 2 Maximum Height 800 Lb Lifting Capacity

Sumner Manufacturing 783701 2015 Material Lift 16 2 1 2 Maximum Height 800 Lb Lifting Capacity
Sumner Manufacturing 783701 2015 Material Lift 16 2 1 2 Maximum Height 800 Lb Lifting Capacity

Sumner Manufacturing 783701 2015 Material Lift 16 2 1 2 Maximum Height 800 Lb Lifting Capacity. Fast action stabilizer legs fold down with ease and lock in place. Cable feeds inside mast, removing exposed cable from near the operator's face. Sumner's Series 2000 material lifts are built for heavy materials and continuous work. This compact lift offers stronger mast design and a superior cabling system. The shorter mast sections allow the 2000 to travel through doorways without tipping and to fit nicely into vehicles with small storage space. Sumner-built highly reliable single-speed winch. Lockable 5", casters - hard tread urethane wheels with Delrin bearings. 10", rough terrain wheels makes loading a truck or van hassle free.

Genie SLA10 Superlift Advantage Material Lift 1 000 Lb Capacity Model SLA 10 STD

Genie SLA10 Superlift Advantage Material Lift 1 000 Lb Capacity Model SLA 10 STD
Genie SLA10 Superlift Advantage Material Lift 1 000 Lb Capacity Model SLA 10 STD

Genie SLA10 Superlift Advantage Material Lift 1 000 Lb Capacity Model SLA 10 STD. Loads easily onto a pickup truck. fork opening can easily handle standard pallets. working load height (fork up), Material Type: Aluminum, steel, Fork Width (in.), 23, Load Range: 0-1, 000 lbs. W forks with 23 in. Heavy-duty aluminum and steel construction. H unit rolls through doorways in the upright position. Hold-down bar secures the telescoping mast during transport. This manually operated Genie SLA 10 Superlift Advantage Material Lift features a dependable, field-proven design with patented telescoping mast system and a welded steel base for extra support. The one-speed manual winch lifts up to 1, 000 lbs. Opening (in.), 23, Finish Type: Metal, Standard tube fork, Capacity (lbs.), 1, 000, Dimensions L x W x H (in.), 31 x 33 1 / 2 x 78 1 / 2, Fork Length (in.), 27.

Bolton Tools New Stationary Industrial Electric Powered Hydraulic Lift Table 2200 LB Of Capacity 70 1 Max Height Model ETW1000

Bolton Tools New Stationary Industrial Electric Powered Hydraulic Lift Table 2200 LB Of Capacity 70 1 Max Height Model ETW1000
Bolton Tools New Stationary Industrial Electric Powered Hydraulic Lift Table 2200 LB Of Capacity 70 1 Max Height Model ETW1000

Bolton Tools New Stationary Industrial Electric Powered Hydraulic Lift Table 2200 LB Of Capacity 70 1 Max Height Model ETW1000. Hydraulic lift table can load up to 2200 LB capacity. 1.1 KW of horsepower, 110 V / 60 HZ. The Bolton Tools Industrial Strength Hydraulic Electric Lift Table features AC powered double hydraulic cylinder, vertical double scissor table which can lift your cargo up to 2200 lb (1000 kg). Horsepower of 1.1 KW. Motor with 110 V / 60 Hz. Minimum height of 12.0", (305 mm). Maximum height of 70.1", (1780 mm). The table dimensions of 51.2", x 32.3", (1300 x 820 mm). The maximum height can reach up to 70.1". Table dimensions of 51.2", x 32.3".

Sumner 783703 2025 Material Lift 650 Lb Lifting Capacity 25 5 1 8 Maximum Height

Sumner 783703 2025 Material Lift 650 Lb Lifting Capacity 25 5 1 8 Maximum Height
Sumner 783703 2025 Material Lift 650 Lb Lifting Capacity 25 5 1 8 Maximum Height

Sumner 783703 2025 Material Lift 650 Lb Lifting Capacity 25 5 1 8 Maximum Height. Cable feeds inside mast, removing exposed cable from near the operator's face. Fast action stabilizer legs fold down with ease and lock in place. This compact lift offers stronger mast design and a superior cabling system. Sumner's Series 2000 material lifts are built for heavy materials and continuous work. The shorter mast sections allow the 2000 to travel through doorways without tipping and to fit nicely into vehicles with small storage space. Sumner-built highly reliable single-speed winch. Lockable 5", casters - hard tread urethane wheels with Delrin bearings. 10", rough terrain wheels makes loading a truck or van hassle free.

Wesco 272941 Value Lift With Handle Polyurethane Wheels 880 Lb Load Capacity 59 Lift Height 22 1 2 X 37 X 70

Wesco 272941 Value Lift With Handle Polyurethane Wheels 880 Lb Load Capacity 59 Lift Height 22 1 2 X 37 X 70
Wesco 272941 Value Lift With Handle Polyurethane Wheels 880 Lb Load Capacity 59 Lift Height 22 1 2 X 37 X 70

Wesco 272941 Value Lift With Handle Polyurethane Wheels 880 Lb Load Capacity 59 Lift Height 22 1 2 X 37 X 70. Wesco manufactures material handling equipment. Material lifts typically comprise a vertical metal frame and two forks that can support a pallet of goods and that can be raised or lowered to an optimal, ergonomic height for loading or unloading. This Wesco 272941 four-wheeled hydraulic material lift with forked platform can be used for lifting and transporting heavy loads up to 880 lb. The swivel casters can be locked for stability when not transporting a load. This four-wheeled hydraulic material lift with forked platform is suitable for lifting and transporting heavy loads in industrial and commercial settings. The forks may be controlled with a hand crank or a foot pump, and they can sometimes be inverted to adjust the service range. The company, founded in 1948, is headquartered in North Wales, PA. Wheels allow the material lift to be rolled for moving materials. Wesco Industrial Products 272942 Value Lift platform, 26", x 22". A foot-operated hydraulic pump raises the platform from its 3.5", minimum height to its 59", maximum height. The frame has a chrome-plated handle and rails and measures 22.5 x 37 x 70 inches (W x D x H) overall. The adjustable forks measure 4 x 25.5 inches (W x D) each and can be adjusted from 8.5 to 19.5", between the inside edges of each fork. (W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back; H is height, the vertical distance from bottom to top.) The lift has two fixed 3", polyurethane load wheels and two 5", polyurethane swivel casters for maneuverability. Four-wheeled hydraulic material lift with 4", x 25.5", forks for lifting and transporting heavy loads. Foot-operated hydraulic pump for 59", maximum lifting height. Two 3", fixed polyurethane load wheels and two locking 5", swivel casters for safety and maneuverability. Measures 22.5", x 37", x 70", overall.

Vestil LLW 202058 FW Light Load Lift With Hand Winch Steel 29 3 4 Length 20 1 16 Width 66 1 2 Height 500 Lbs Capacity

Vestil LLW 202058 FW Light Load Lift With Hand Winch Steel 29 3 4 Length 20 1 16 Width 66 1 2 Height 500 Lbs Capacity
Vestil LLW 202058 FW Light Load Lift With Hand Winch Steel 29 3 4 Length 20 1 16 Width 66 1 2 Height 500 Lbs Capacity

Vestil LLW 202058 FW Light Load Lift With Hand Winch Steel 29 3 4 Length 20 1 16 Width 66 1 2 Height 500 Lbs Capacity. This product is intended for use in professional and industrial environments. Wheels allow the material lift to be rolled for moving materials. Four wheel design conveniently rolls when loaded. Vestil manufactures materials handling equipment, including hoists and trolleys, jib and gantry cranes, loading dock equipment, and storage solutions. Easy to operate lift system makes lifting products to ergonomic heights simple. This lift has a load capacity of 500 lb. Material lifts typically comprise a vertical metal frame and two forks that can support a pallet of goods and that can be raised or lowered to an optimal, ergonomic height for loading or unloading. Solid steel construction provides long lasting rugged use. Two loading wheels near the top of the frame allow the lift to be loaded into a truck bed for transport. This material lift is made of steel, which is resistant to wear and corrosion. The forks may be controlled with a hand crank or a foot pump, and they can sometimes be inverted to adjust the service range. The company, founded in 1968, is headquartered in Angola, IN. The Vestil LLW-202058-FW light load lift can be used to transport heavy materials, and it has a steel frame, a hand winch, four swivel caster wheels, two fixed rear wheels, and a platform that can be raised or lowered to an optimal height for loading or unloading. The hand winch can be used to raise the platform by 1 inch with each complete rotation. The four caster wheels swivel for maneuverability, measure 2 inches in diameter, and are made of semi-steel, which is resistant to abrasions and wear. The two mold-on rubber rear wheels measure 2 inches wide and 6 inches in diameter, absorb shocks and vibrations, won't deflate or scratch floors, and are resistant to wear. and measures 66-1 / 2 x 20-1 / 16 x 29-3 / 4 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The platform measures 20 x 20 inches (W x D) and has a service range of 3-1 / 4 to 58 inches high.

Pro Lift T 5501 Grey Air Actuated Lawn Mower Lift

Pro Lift T 5501 Grey Air Actuated Lawn Mower Lift
Pro Lift T 5501 Grey Air Actuated Lawn Mower Lift

Pro Lift T 5501 Grey Air Actuated Lawn Mower Lift. Innovative Lawn Mower Lift not only lifts your riding mower but also serves as a maintenance stand. While under the load, the added safety features are working for you with the professional premium grade 6 ton bottle jack and the automatic mechanical locking mechanisms that makes the double as a safe maintenance stand as well. 750 pounds Saddle weight capacity and 500 pounds Wheel Bracket weight capacity. The air actuated function gives you the ability to pump and lift effortless. The Pro-Lift Lawn Mower Lift will help keep you ahead of the game with your routine lawn mower maintenance like belt replacement, blade sharpening, and debris removal in a safe and timely manner. Efficient foot pump operated hydraulic 6 ton bottle jack. If you want a premium, reliable and safe way to extend the operating life of your lawn mower, then the Pro-Lift Lawn Mower Lift belongs in your garage. The 6 ton hydraulic bottle jack ensures a front axle saddle lift capacity of 750 pounds and wheel bracket lift capacity of 500 pounds. The wheel stirrups are adjustable from an inside bracket width of 20 inches to an outside width of 59 inches accommodating most garden tractor and Zero-Turn mowers in the market. The design of this is raised by the operation of an effortless and convenient foot pump to 27 inches high, providing plenty of room to safely and freely access the mower undercarriage. 750 pounds Saddle weight capacity and 500 pounds Wheel Bracket weight capacity - Efficient foot pump operated hydraulic 6 ton bottle jack - 27 inch Lift Height - Air Actuated bottle jack allows for effortless, pump-free, lifting - Capacity: 500 Lbs - Lift Height: 27 Inch - Dimension: 55.91 x 18.9 x 6.9 Inch - Item Weight: 160 Lbs Pro Lift T-5501 Air Actuated Lawn Mower Lift is backed by 90 Days warranty from the date of the. 27 inch Lift Height. Air Actuated bottle jack allows for effortless, pump-free, lifting by attaching the 1 / 4", Quick Connector remote to your air supply, raising it to your desired height.

Northern Industrial 4 Wheel Platform Lift Truck 750 Lb Capacity

Northern Industrial 4 Wheel Platform Lift Truck 750 Lb Capacity
Northern Industrial 4 Wheel Platform Lift Truck 750 Lb Capacity

Northern Industrial 4 Wheel Platform Lift Truck 750 Lb Capacity. Safe and easy for one person to handle loads up to 750-lbs. Easy-to-use handy product. Non-slip chain is used for accurate positioning. Two nylon rear wheels, two front swivel casters for maximum maneuverability. Raised Height (in.), 51, Platform Size L x W (in.), 22 x 22, Front Wheel Size (in.), 3 1 / 2, Load Capacity (lbs.), 770, Lowered Height (in.), 6 1 / 8, Product Style: Platform lift, Rear Wheel Size (in.), 7 7 / 8. Foot-operated pump can be used to raise the platform easily, while knob release handle used to lower the platform. Ideal for areas where hand trucks are accessible but larger lifts are not.

Gyptool 11 Ft Heavy Duty Drywall Lifter Panel Lift Installation Jack Red

Gyptool 11 Ft Heavy Duty Drywall Lifter Panel Lift Installation Jack Red
Gyptool 11 Ft Heavy Duty Drywall Lifter Panel Lift Installation Jack Red

Gyptool 11 Ft Heavy Duty Drywall Lifter Panel Lift Installation Jack Red. Tilt (side / side), 10. The cradle rotates 360, tilts 65 forward / backward and 10 side-to-side for use on both flat and sloped ceilings. Tilt (front / back), 65. Base: 5 locking tripod. reach for flat ceilings over 13 ft. It can hoist panels up to 4 x 16 in size and features an 11 reach for flat ceilings and an over 13 reach on walls / angled ceilings (Gyp Tool also offers an optional 5 extension, not. This contractor-grade drywall lift by Gyp Tool is built for professionals and crafted from extra-duty, all-welded steel; it is designed to last a lifetime! Hoists panels overhead. reach on walls / angled ceilings. Cradle rotation: Full 360. Construction: Welded steel. Max reach: 11 plus panel. Maximum load: 150 pounds. The entire unit is supported by a 5 wide tripod base with anti-slip casters that won't damage floors. Maximum panel: 4 x 16. Constructed from heavy-duty steel. Quick tool-free setup and disassembly for storage. Quick, tool-free setup and disassembly for storage. Gyp Tool Mini-Lifter Foot Lift Lever Tool for Drywall and Gypsum Panels Sheets - All Metal. Gyp Tool 4 ft. Calculated Industries 8110 Center Mark Drywall Recessed Lighting Cutout Locator Tool. Board Mate - Drywall Fitting Tool, Supports The Board In Place While Installing. QLT By MARSHALLTOWN PL 589 Panel Lifter / Rasp / Bottle Opener. Stanley 93-301 14-Inch Yellow Panel Carry Handle. Calculated Industries 8105 Blind Mark Drywall Electrical Box Locator Tool. Drywall Lifter Panel Lift Installation Jack Extension - Orange. Roto Zip GP 8 1 / 8-Inch Guide Point Drywall Cutting Zip Bit, 8-Pack. DEWALT DW 660 Cut-Out 5 Amp 30, 000 RPM Rotary Tool with 1 / 8-Inch and 1 / 4-Inch Collets. Calculated Industries 8115 Multi Mark Drywall Cutout Locator Tool. This large cradle extends to 10 in width, has rubber caps on 3-position auto-locking outriggers to protect your material, and also features panel support hooks; it retracts to just 36", from the floor when tilted for easy loading. A simple-to-operate, single-stage winch is mounted on the lifter (18", wheel, 4", handle) with an extra-strong, braided-steel lifting cable and a brake and capped handle to protect hands. The unit features an ultra heavy-duty 3", triangular frame with oversized locknuts and clevis pins at critical pivot-points, and the base a flip-down backstop to secure the lift's position for mounting. Working height: 36", 11. Frame: 3", triangle, 4 sections. Winch with extra-strong lifting cable and brake.

Lift Tables 4 X 4 Aluminum Micro Lift Tables Platforms Scissor Mechanism Lab Lifting

Lift Tables 4 X 4 Aluminum Micro Lift Tables Platforms Scissor Mechanism Lab Lifting
Lift Tables 4 X 4 Aluminum Micro Lift Tables Platforms Scissor Mechanism Lab Lifting

Lift Tables 4 X 4 Aluminum Micro Lift Tables Platforms Scissor Mechanism Lab Lifting. Top and bottom tables are constructed of anodized aluminum. The hand wheels adjustment knobs provide smooth and accurate height adjustment. The micro lift tables provide stable height adjustment for various items in the lab such as flasks, baths, and small equipment.

Genie Hoist GH 3 8 Portable Lift 300 Lbs Load Capacity Lift Height 12 CO2 Tank Sold Separately

Genie Hoist GH 3 8 Portable Lift 300 Lbs Load Capacity Lift Height 12 CO2 Tank Sold Separately
Genie Hoist GH 3 8 Portable Lift 300 Lbs Load Capacity Lift Height 12 CO2 Tank Sold Separately

Genie Hoist GH 3 8 Portable Lift 300 Lbs Load Capacity Lift Height 12 CO2 Tank Sold Separately. Safety Features, 16 Hose, and Pistol-Grip Control To ensure the lift stays in place while in use, it has wheel brakes and leg locks for safety. Hoist can be powered by CO 2 or compressed air for convenience. Portable and compact lift can hoist up to 300 lbs. Hoist can be powered by CO 2 or compressed air for convenience Patented pistol-grip control handle for ease of use Auto-lubricating oil reservoir on each piston inside cylinder for a smooth lift The Genie GH-3.8 Super Hoist material lift is a compressed air- or CO 2-powered lift with a portable and compact design for lifting, positioning, and installing heavy items. Auto-lubricating oil reservoir on each piston inside cylinder for a smooth lift. Genie is headquartered in Redmond, WA, and manufactures a variety of lifts, booms, light towers, and telehandlers. For industrial use only. The lift has a one-piece platform with a weight capacity of 300 lbs (136 kg), which screws directly onto an auto-lubricating lifting cylinder, for smooth up and down movement. Recommended PSI is 85 or 5.86 bar. About Genie Industries Genie Industries, a subsidiary of Terex Corporation, was founded in 1966 with the introduction of the Genie Hoist, a portable pneumatic material lift. Patented pistol-grip control handle for ease of use. About Material Lifts Material lifts are used for lifting a variety of loads such as installation of electrical fixtures, ducts, drywall, ceiling panels, and overhead sprinklers, among many others. Material lift for construction, maintenance, and installation. Genie Hoist, GH-5.6, Portable Lift, 250 lbs Load Capacity, Lift Height 18 (CO 2 Tank Sold Separately). Genie Superlift Contractor, SLC- 18, 650 lbs Load Capacity, Lift Height 18 6", Load Transport with Single User. With a bottle-mounting bracket that accepts most common C 02 bottles, including a 16 hose for added mobility, the lift can be operated using either compressed air or CO The lift is controlled by a patented pistol-grip control handle for lifting and lowering items and has folding legs to make the lift compact for Design with 300 Lb Load Capacity The lift has a stowed height of 3 5", (1.04 m), a maximum lifting height of 12 5.6", (3.80 m), and a load capacity of 300 lbs (136 kg). Platform dimensions are 1 7", 48 m (l) x 2/.61 m (w) and the base measures 4 5", 1.35 m corner to corner. Storage dimensions are 14 x 14 x 39.5", 36 36 x 1 m and the lift weighs 75 lbs (34 kg). Maximum lifting height of 12 5.6", (3.80 m), with a load capacity of 300 lbs (136 kg) for safely lifting items.

Ranger Quickjack Portable Lift 1 3 4 Ton Capacity Model BL 3500

Ranger Quickjack Portable Lift 1 3 4 Ton Capacity Model BL 3500
Ranger Quickjack Portable Lift 1 3 4 Ton Capacity Model BL 3500

Ranger Quickjack Portable Lift 1 3 4 Ton Capacity Model BL 3500. Built-in flow divider keeps lifting precisely equalized. Open-center design provides clear undercar access and can be installed at the width that best fits your vehicle. Remote pendant control with 20 ft. capacity Ranger Quick Jack Portable Lift is a super fast vehicle jacking and support system. Lift Height (in.), 16 3 / 4, Strokes to Max. Lift Height (in.), 20, Base: 10 1 / 2 in. Lift (qty.), Electric / hydraulic, Lift Capacity (tons), 1 3 / 4, Frame Material: Steel. Offers a sturdy, safe and convenient way to replace floor jacks and jack stands. Can go from the stowed position to full use in less than 60 seconds. profile fits in some very tight situations, even under most race cars. cord for operation from a safe distance.

Ballymore Scissor Lifts Roll Out Cantilever Option Dlx Dl C10 Desc 22 Inch Cantileber Dmsl Cl10

Ballymore Scissor Lifts Roll Out Cantilever Option Dlx Dl C10 Desc 22 Inch Cantileber Dmsl Cl10
Ballymore Scissor Lifts Roll Out Cantilever Option Dlx Dl C10 Desc 22 Inch Cantileber Dmsl Cl10

Ballymore Scissor Lifts Roll Out Cantilever Option Dlx Dl C10 Desc 22 Inch Cantileber Dmsl Cl10. Available in THREE sizes 12, 19, AND 26 foot platform heights. Roll Out Cantilever option allows for above item access. Can be safely driven when fully raised emergency lowering system to prevent catastrophic drop Forklift pockets for speedy movement by forklift about the plsnt The 2 larger sized units are 2 man units! Optional Safety Sensing system warns people as they come into a danger zone - better than always beeping. Same concept as the Manual Push Scissor Lift - But with power drive. Desc: 22 Inch Cantileber.

2000LB Swivel Lift Hoist Truck Pickup Crane Davit 1TON

2000LB Swivel Lift Hoist Truck Pickup Crane Davit 1TON
2000LB Swivel Lift Hoist Truck Pickup Crane Davit 1TON

2000LB Swivel Lift Hoist Truck Pickup Crane Davit 1TON. Rotation Range: 360. Lifting Cap: 2000 Lbs. Keeper (02626) 10 x 2", Lift Sling. Lifting Height: 94.5", Min. Lifting Height: 22.8". Lifting Radius: 52", Min. Lifting Radius: 35.4". Base Exterior Size: 10.6", x 10.6".

Genie Super Lift Advantage SLA 10 Straddle Base 1000 Lbs Load Capacity Lift Height 11 5 5 From Ground Level Load Transport With Single User

Genie Super Lift Advantage SLA 10 Straddle Base 1000 Lbs Load Capacity Lift Height 11 5 5 From Ground Level Load Transport With Single User
Genie Super Lift Advantage SLA 10 Straddle Base 1000 Lbs Load Capacity Lift Height 11 5 5 From Ground Level Load Transport With Single User

Genie Super Lift Advantage SLA 10 Straddle Base 1000 Lbs Load Capacity Lift Height 11 5 5 From Ground Level Load Transport With Single User. Lift weighs 303 lbs (137 kg) for applications with weight limitations. Capacity of 1, 000 lbs (454 kg) for lifting heavy loads. About Material Lifts Material lifts are used for lifting a variety of loads such as installation of electrical fixtures, ducts, drywall, ceiling panels, and overhead sprinklers, among many others. Genie is headquartered in Redmond, WA, and manufactures a variety of lifts, booms, light towers, and telehandlers. Material lift with steel forks for construction, maintenance and installation. A hold-down bar secures the mast during transport. For industrial use only. Adjustable base to straddle loads or fixed objects. About Genie Industries Genie Industries, a subsidiary of Terex Corporation, was founded in 1966 with the introduction of the Genie Hoist, a portable pneumatic material lift. Lifts load to a maximum height of 11 5.5", (3.49 m) Capacity of 1, 000 lbs (454 kg) for lifting heavy loads Lift weighs 303 lbs (137 kg) for applications with weight limitations The Genie SLA-10 Superlift is a material lift with a straddle base for straddling loads, steel forks, an 11 5.5", (3.49 m) maximum lifting height, and a 1, 000 lbs (454 kg) capacity. The SLA-10 operates using a one-speed manual winch for lifting and lowering the forks and has a patented telescoping mast system. Easy to Maneuver The lift has 4", (10 cm) maneuverable front casters, and 5", (13 cm) rear casters that have 4-way swivel locks and side brakes for securing the lift during Design The steel forks measure 27", (l) by 23", (w) by 2.5", by 2.5", (d), and the entire lift can fit through standard doorways for ease of access. Lifts load to a maximum height of 11 5.5", (3.49 m).