24 Best and Coolest Air Flow Meters

11 Jun 2019

Phresh Filter 701005 Filter 6 In X 16 In 400 CFM

Phresh Filter 701005 Filter 6 In X 16 In 400 CFM
Phresh Filter 701005 Filter 6 In X 16 In 400 CFM

Phresh Filter 701005 Filter 6 In X 16 In 400 CFM. Machine packed carbon means more carbon and less movement. Large selection of sizes available to fit any application. 51% open air custom mesh. Flange is riveted to the filter and cannot be removed. Cone shaped internal base for optimum air flow. Unique Anti Air Bypass System. Aluminum tops and bases for reduced weight. Sealed, bagged, boxed and labeled directly after being manufactured for optimum life span, handling and presentation. Half the weight of other filters. Hydrofarm ACDF 6 Active Air 400 CFM Inline Fan, 6-Inch, 6 Inch. Apollo Horticulture 48", x 48", x 80", Mylar Hydroponic Grow Tent for Indoor Plant Growing. Apollo Horticulture GLRP 18 Pair of 1 / 8", Adjustable Grow Light Rope Hanger w / Improved Metal Internal Gears. General Hydroponics p H Control Kit. Can Fan GL 56736746 736746 Fan, 6". AC Infinity CLOUDLINE S 6, Quiet 6", Inline Duct Fan with Speed Controller - Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics. AC Infinity CLOUDLINE T 6, Quiet 6", Inline Duct Fan with Temperature Humidity Controller - Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics. Ideal-Air 380037 Noise Reduction Clamp, 6". Vortex 347 CFM S Line S-600 Fan, 6". 46 mm (1.8") RC-48 activated, certified virgin carbon bed. 46 mm (18") RC-48 activated, certified virgin carbon bed.

CO2 RH Temp Real Time Monitor Kit Set W PC Software Recording Analyzer Portable Indoor Air Quality Carbon Dioxide Meter Sensor Temperature Dew Point Wet Bulb Humidity

CO2 RH Temp Real Time Monitor Kit Set W PC Software Recording Analyzer Portable Indoor Air Quality Carbon Dioxide Meter Sensor Temperature Dew Point Wet Bulb Humidity
CO2 RH Temp Real Time Monitor Kit Set W PC Software Recording Analyzer Portable Indoor Air Quality Carbon Dioxide Meter Sensor Temperature Dew Point Wet Bulb Humidity

CO2 RH Temp Real Time Monitor Kit Set W PC Software Recording Analyzer Portable Indoor Air Quality Carbon Dioxide Meter Sensor Temperature Dew Point Wet Bulb Humidity. NDIR SENSOR for CO 2 DETECTION- Non-dispersive infrared technology is used to ensure the reliability and long-term stability. AUDIBLE CO 2 ALARM- The alarm beeps when the CO 2 Level exceeds the preset value. Data output to PC every 2 seconds. Features: Triple displays of CO 2 level, temperature (C / F) Humidity Stable NDIR sensor for CO 2 detection Statistics weighted averages TWA (8 hours weighted average) STEL (15 minutes-weighted average) Sound warning CO 2 high-level risk PC connection on-line logging data analysis Manual calibration of CO 2 and Humidity Range CO 2: 0 9999 ppm (2001 9999 out of scale) Temperature: 10 60 C (14 140 F) Humidity: 0.1% 99.9% RH Dew Point: 20.0 59.9 C Wet Bulb: 5.0 59.9 C Resolution: 1 ppm, 0.1 C / F, 0.1% RHAccuracy: C 02: 50 ppm 5% of reading (0 2000 ppm) other ranges are not specified Temp: 0.6 C / 0.9 F Humidity: 3% RH (at 25 C, 10 90% RH), 5% RH (at 25 C, others) Warm-up time: 30 seconds Response time CO 2: Temp: RH: NO RELAY Operating condition: 0 50 C, 0 95% RH condensation) Storage Condition: 20 50 C, 0 95% RH condensation) Set 1 x Portable CO 2 meter 4 x AA batteries 1 x CD Software USB Cable 1 x 9 V Universal Power Adapter English Operation Manual Hard Carrying Case. Data logged in software can be exported in chart or txt file for further analysis. Allows continuous monitoring of CO 2, RH Temperature Level. The alarm threshold is adjustable. NORMAL / MAX / MIN / AVERAGE (15 mins / 8 hrs) MODE- It can show not only the normal, maximum and minimum CO 2 readings but also the weighted average CO 2 readings in the past 15 mins (STEL mode) and 8 hours (TWA mode). CONNECT TO PC FOR ON-LINE MONITORING ANALYSIS- This Kit Set comes with software and power adapter. Measures CO 2 level, Air Temperature, Dew Point (DP), Wet Bulb Temperature (WB) and Humidity (RH) Continuous monitoring kit set a universal power adapter Software CD USB Cable for on-line data logging when connecting to PC. MULTIPLE MEASUREMENT DISPLAYS AT ONCE- CO 2, Temperature, and Relative Humidity readings are all shown on the LCD display at the same time. Measures 0 9999 ppm while 0 2000 ppm can maintain a high accuracy at /- 50 ppm.

100 1000Ml Min Air Oxygen Gas Flow Meter Flowmeter With Control Valve For Measuring Controlling Gas Flow

100 1000Ml Min Air Oxygen Gas Flow Meter Flowmeter With Control Valve For Measuring Controlling Gas Flow
100 1000Ml Min Air Oxygen Gas Flow Meter Flowmeter With Control Valve For Measuring Controlling Gas Flow

100 1000Ml Min Air Oxygen Gas Flow Meter Flowmeter With Control Valve For Measuring Controlling Gas Flow. Mainly used to detect and control oxygen or other gas flow. Made of ABS plastic and SS 304.4. Features: Every product has a unique Manufacturing Part Number label on the inner that proves it has been qualified, which Part Number, Model Number and inspection date information; If you have any about the item, please provide us the Manufacturing Part Number for checking, your profits will be. Made of plastic and SS 304. Used for measuring the gas single-phase non-pulsating flow. CNBTR LZQ-3 0-10 LPM Tube Type Acylic Flowmeter Gas 8 mm Hose Fitting Oxygen Flowmeter Regulator Flow Meter. ABS LZM-6 100-1000 ml / min Oxygen Air Gas Flowmeter with Control Valve for Oxygen Adjustable. Measure range is 100-1000 ml / min. Material: Plastic and SS 304 Color: Transparent black white Model: LZM-6 Measure Range: 100-1000 ml / min Working Pressure: Less than 0.6 Mpa Working temperature: 0-60 Degree Accuracy Class: 4 Percent Connection Type: 1 / 4", BSPT Medium Applicable: Gas Overall Size: 93 x 22 x 68 mm / 3.66 x 0.87 x 2.68 inches (L x Dia x Max W) Weight: 77 g require vertical installation, water from bottom to top. Measure range is 100-1000 ml / min.

Dwyer Visi Float Series VFB Flowmeter 4 Scale Length Range 10 100 SCFH Air With Stainless Steel Valve 1 8 Female NPT Process Connection

Dwyer Visi Float Series VFB Flowmeter 4 Scale Length Range 10 100 SCFH Air With Stainless Steel Valve 1 8 Female NPT Process Connection
Dwyer Visi Float Series VFB Flowmeter 4 Scale Length Range 10 100 SCFH Air With Stainless Steel Valve 1 8 Female NPT Process Connection

Dwyer Visi Float Series VFB Flowmeter 4 Scale Length Range 10 100 SCFH Air With Stainless Steel Valve 1 8 Female NPT Process Connection. The most common types of anemometer are cup, vane, hot-wire, and Pitot tube. Accuracy of or - 3% of full scale. The company, founded in 1931, is headquartered in Michigan City, IN. Cup and vane anemometers calculate air velocity based on the number of rotations of the cups or vane. Hot-wire anemometers calculate air velocity by measuring the change in electrical resistance as air flow cools a heated wire. Black scale graduations are hot-stamped into the plastic for distinct readings. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. or fpm), knots, miles per hour (mph), and kilometers per hour (km / h). Precision machined from solid acrylic plastic to resist breakage and provide a clear view of the scale. Lightweight flowmeter has a metal mounting insert for panel mounting and can also be supported directly by system piping. Inlet and outlet connections are brass except for models with stainless steel wetted parts and the connections are on the back of the flowmeter except for models that have end connections. Models are available for measuring air flow in scfh, scfm, lpm, or cc / min. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow, or with a pointer flag for clear-cut readings. This lightweight flowmeter has a metal mounting insert for panel mounting and can also be supported directly by system piping. The Dwyer Visi-Float series VFB flowmeter is a 4", scale air flow meter with 1 / 8", female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of or 3% of full scale, and is precision machined from solid acrylic plastic to resist breakage and provide a clear view of the scale. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other length 4", (on average) Accuracy or 3% of full scale Connections 1 / 8", female NPT inlet and outlet Pressure and temperature rating Without valve: 100 psig / 6.9 bar 65 degrees C / 150 degrees F; with valve: 100 psig / 6.9 bar 48 degrees C / 120 degrees FWetted materials Body: acrylic plastic; O-ring: Buna-N; metal parts: brass (standard) or stainless steel (applicable models), float (varies by range), black glass, nickel / copper alloy, stainless steel, or aluminum Dimensions (H x W x D) 169.9 x 34.93 x 31.75 mm / 6-11 / 16 x 1-3 / 8 x 1-1 / 4 inches Weight 0.20 to 0.25 kg / 7.2 to 8.8 oz. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within ducts. In addition to air velocity, anemometers may measure wind direction, air pressure, air flow volume, air temperature, humidity, light, and other properties. Pitot tube anemometers measure air pressure within a tube and calculate air velocity based on the difference in pressure between the air inside and outside of the tube. Many anemometers have digital readouts and can display air velocity readings in different units of measure, such as meters per second (m / s), feet per minute (ft. Dwyer Instruments manufactures measurement and control instruments, including pressure gauges, flow meters, level instrumentation, temperature instrumentation, and air quality monitors. 4", scale flowmeter with 1 / 8", female NPT connections for inline monitoring and measuring air flow.

Digiten G1 2 Thread Water Flow Hall Sensor Switch Flowmeter Counter With Temperature Sensor Female And Male Thread 1 25L Min

Digiten G1 2 Thread Water Flow Hall Sensor Switch Flowmeter Counter With Temperature Sensor Female And Male Thread 1 25L Min
Digiten G1 2 Thread Water Flow Hall Sensor Switch Flowmeter Counter With Temperature Sensor Female And Male Thread 1 25L Min

Digiten G1 2 Thread Water Flow Hall Sensor Switch Flowmeter Counter With Temperature Sensor Female And Male Thread 1 25L Min. It is small size and easy to install. The flow meter is stable and reliable. It is small in size and easy to install. Work for Android and PI system. This flow sensor is made of brown, it is waterproof, heat resistance, pressurresistance, cold resistance. Tis flowmeter can measure water temperature with temperature sensor. The flowmeter can be used in a wide range of instruments to measure the flow of fluid in pipes The flow meter is stable and reliable. All materials are in line with ROHS testing range: 1-25 L / min Max water pressure: 1.75 Mpa F 11 Q (L / min) Working Voltage Range: DC 5-15 V Accuracy: 3% Temperature sensor: NTC 3950 R 10 25 Cmale Thread External Diameter: 20.5 mm (0.8 Inch) Female Thread Internal Diameter: 19 mm (0.74 Inch) Tube Length: 65 mm (2.56 Inch) Cable Length: 30 cm (11.81 Inch) Temperature Sensor Length: 16 mm (0.63 Inch) Size: 65 mm 30 mm 28 mm (L W H) Packing Including: Flow meter x 1. Tis flowmeter can measure water temperature with temperature sensor. The flowmeter can be used in a wide range of instruments to measure the flow of fluid in pipes.

Dwyer Airflow Meter Vaneometer

Dwyer Airflow Meter Vaneometer
Dwyer Airflow Meter Vaneometer

Dwyer Airflow Meter Vaneometer. Its small size and light weight (4 ounces) make it ideal to carry from one work station to another. Accurate to 5% of full scale to 100 FPM and 10% from 100 FPM to top of scale. The housing is molded from tough ABS plastic and easy to clean with soap and water. OSHA, EPA and other safety ventilation requirements for fume hoods can now be quickly checked, even by untrained personnel. The polyester vane can be cleaned with lacquer thinner. It has a spirit level to ensure accurate readings and the large scales are easy to read and visible from both sides. Dwyer Air Flow Meter Continuously displays face velocity of the ductless fume hood. Use a Vaneometer Swing Vane Anemometer to measure velocity of air flow into laboratory fume hoods to determine when to change filters, or wherever needed to meet OSHA standards of ventilation for smoke, dust or fume removal. Durable instrument specifically designed to simplify the measurement of low air velocities from 25 to 400 feet per minute.

SODIAL R 0 1 1LPM 1L Oxygen Flow Meter Flowmeter With Control Valve For Oxygen Air Gas

SODIAL R 0 1 1LPM 1L Oxygen Flow Meter Flowmeter With Control Valve For Oxygen Air Gas
SODIAL R 0 1 1LPM 1L Oxygen Flow Meter Flowmeter With Control Valve For Oxygen Air Gas

SODIAL R 0 1 1LPM 1L Oxygen Flow Meter Flowmeter With Control Valve For Oxygen Air Gas. Regulating valve: with valve. Name: Oxygen Air Flow Meter. Our products will enhance your experience to unparalleled inspiration. ABS LZM-6 100-1000 ml / min Oxygen Air Gas Flowmeter with Control Valve for Oxygen Adjustable. SODIAL (R) 0.1-1 LPM 1 L Oxygen Flow Meter Flowmeter with Control Valve for Oxygen Air Gas Accuracy: four degree, 0.5% Temperature: 0-60 Float material: Agate ball O-ring material: Silicon rubber Heigth: 93 mm / 3.66 inch Measure range: 0.1-1 LPMmaterial: Silicon rubbercolour: Transparent green 1 x Oxygen Air Flow Meter Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. Connection type: hose 8 mm / 0.31 inch.

Plume Labs Flow The Personal Air Pollution Sensor

Plume Labs Flow The Personal Air Pollution Sensor
Plume Labs Flow The Personal Air Pollution Sensor

Plume Labs Flow The Personal Air Pollution Sensor. Awards: Red Dot Product Design 2019, Fast Co Most Innovative Company 2019, Fast Co World Changing Ideas 2019. We often hear about entire cities having a pollution but in reality what you breathe can change dramatically simply from one street to the next, one building to the next, one room to the next. Strapped to your bag, your bike, your belt, Flow is a tool to explain and a tool to empower, and the first step towards cleaner air for our cities. The more you use Flow, the more it helps! It's the intelligent device that fits into your daily life and helps you make the best air quality choices for yourself, your family, your community. Flow and its companion app help you what's in the air you breathe and build the best reflexes to minimise your exposure to pollution. Flow makes air quality data personal. Flow tracks the three main categories of pollutants with a direct impact on our health: Nitrogen Dioxyde (NO 2), Volatile Organic Compounds (VOC) and Particulate Matter (PM 2.5, PM 10). With the help of your phone's GPS, Flow builds out the air quality maps of all the places it's been by your side. The first and only portable sensor with comprehensive tracking capabilities. By helping you map pollution in your own environment with an accuracy of a few metres, rather than relying on public monitoring stations miles apart from one another, Flow is a concrete answer to our biggest environmental health challenge. Always-on measurement gives you the minute-by-minute breakdown of your daily exposure with 24 H battery capacity and 2.5 H charging time.

Gas Flowmeter LZQ 7 Flowmeter 1 10LPM Flow Meter With Control Valve For Oxygen Air Gas

Gas Flowmeter LZQ 7 Flowmeter 1 10LPM Flow Meter With Control Valve For Oxygen Air Gas
Gas Flowmeter LZQ 7 Flowmeter 1 10LPM Flow Meter With Control Valve For Oxygen Air Gas

Gas Flowmeter LZQ 7 Flowmeter 1 10LPM Flow Meter With Control Valve For Oxygen Air Gas. MADE OF HIGH QUALITY ACRYLIC: Made of high quality acrylic, it is transparent and can hold up to 0.6 MPa pressure. MAINLY USED FOR: Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry. Material: Acrylic plastic metal Connection: 8 mm hose barb Accuracy: 5% Range: 1 10 LPM Pressure: 0.6 MPa Temperature: 0 60 C 1 x Gas Flowmeter. It is simple to use, and has 8 mm barbs for convenient connection to hoses. IT IS SIMPLE TO USE: It is simple to use, and has 8 mm barbs for convenient connection to hoses. Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry. Made of high quality acrylic, it is transparent and can hold up to 0.6 MPa pressure. Features: This gas meter is connected to hose to measure unidirectional gas flow. Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon, toluene, benzene, xylene, hydrogen sulfide, sulfur dioxide, ammonia, etc. INSTRUCTIONS: This gas meter is connected to hose to measure unidirectional gas flow. MEASURABLE GAS: Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon.

Dwyer Visi Float Series VFA Flowmeter 2 Scale Range 1 10 SCFH Air 1 8 Female NPT Process Connection

Dwyer Visi Float Series VFA Flowmeter 2 Scale Range 1 10 SCFH Air 1 8 Female NPT Process Connection
Dwyer Visi Float Series VFA Flowmeter 2 Scale Range 1 10 SCFH Air 1 8 Female NPT Process Connection

Dwyer Visi Float Series VFA Flowmeter 2 Scale Range 1 10 SCFH Air 1 8 Female NPT Process Connection. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Inlet and outlet connections are brass except for models with stainless steel wetted parts and the connections are on the back of the flowmeter except for models that have end connections. The company, founded in 1931, is headquartered in Michigan City, IN. Black scale graduations are hot-stamped into the plastic for distinct readings. The most common types of anemometer are cup, vane, hot-wire, and Pitot tube. Cup and vane anemometers calculate air velocity based on the number of rotations of the cups or vane. or fpm), knots, miles per hour (mph), and kilometers per hour (km / h). Hot-wire anemometers calculate air velocity by measuring the change in electrical resistance as air flow cools a heated wire. Accuracy of or - 5% of full scale. Lightweight flowmeter has a metal mounting insert for panel mounting and can also be supported directly by system piping. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow. Models are available for measuring air flow in scfh or lpm. This lightweight flowmeter has a metal mounting insert for panel mounting and can also be supported directly by system piping. Precision machined from solid acrylic plastic to resist breakage and provide a clear view of the scale. The Dwyer Visi-Float series VFA flowmeter is a 2", scale air flow meter with 1 / 8", female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of or 5% of full scale, and is precision machined from solid acrylic plastic to resist breakage and provide a clear view of the scale. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other length 2", (on average) Accuracy or 5% of full scale Connections 1 / 8", female NPT inlet and outlet Pressure and temperature rating Without valve: 100 psig / 6.9 bar 65 degrees C / 150 degrees F; with valve: 100 psig / 6.9 bar 48 degrees C / 120 degrees FWetted materials Body: acrylic plastic; O-ring: Buna-N; metal parts: brass (standard) or stainless steel (applicable models), float (varies by range), black glass, nickel / copper alloy, stainless steel, or aluminum Dimensions (H x W x D) 104.0 x 25.40 x 31.75 mm / 4-3 / 32 x 1 x 1-1 / 4 inches Weight 0.11 to 0.14 kg / 4.0 to 4.8 oz. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within ducts. In addition to air velocity, anemometers may measure wind direction, air pressure, air flow volume, air temperature, humidity, light, and other properties. Pitot tube anemometers measure air pressure within a tube and calculate air velocity based on the difference in pressure between the air inside and outside of the tube. Many anemometers have digital readouts and can display air velocity readings in different units of measure, such as meters per second (m / s), feet per minute (ft. Dwyer Instruments manufactures measurement and control instruments, including pressure gauges, flow meters, level instrumentation, temperature instrumentation, and air quality monitors. 2", scale flowmeter with 1 / 8", female NPT connections for inline monitoring and measuring air flow.

Flameer 0 5L Min Range 0 5LPM Oxygen Flow Meter Flowmeter W Control Valve For Oxygen Air 8Mm Hose Fitting

Flameer 0 5L Min Range 0 5LPM Oxygen Flow Meter Flowmeter W Control Valve For Oxygen Air 8Mm Hose Fitting
Flameer 0 5L Min Range 0 5LPM Oxygen Flow Meter Flowmeter W Control Valve For Oxygen Air 8Mm Hose Fitting

Flameer 0 5L Min Range 0 5LPM Oxygen Flow Meter Flowmeter W Control Valve For Oxygen Air 8Mm Hose Fitting. Working pressure: 0.6 Mpa. Applicable medium: Gas. Operating temperature: 0-60 C. Connection: 8 MM (hose connection). Material: Acrylic plastic metal. Working pressure: 0.6 Mpa - Widely used for measuring and controlling the flow of oxygen - Product function: to measure gas single-phase non-pulsating flow - Light weight, not fragile, corrosion-resistant, long service life - Scope: Widely used in household oxygen, ozone - Material: Acrylic plastic metal - Color: Multicolor - Size (Lx Wx H, for 0-5 L / min), 100 x 25 x 24 mm / 3.93 x 0.98 x 0.94", Connection: 8 MM (hose connection)- Applicable medium: Gas - Accuracy: 5% Working pressure: 0.6 Mpa - Operating temperature: 0-60 1 Piece of Oxygen Air Flow Meter Your satisfaction is our priority.

Legris 7665 04 11 Nylon Air Flow Control Valve 90 Degree Elbow Meter Out External Screw Knob 5 32 Or 4 Mm Tube OD X 1 8 NPT Male

Legris 7665 04 11 Nylon Air Flow Control Valve 90 Degree Elbow Meter Out External Screw Knob 5 32 Or 4 Mm Tube OD X 1 8 NPT Male
Legris 7665 04 11 Nylon Air Flow Control Valve 90 Degree Elbow Meter Out External Screw Knob 5 32 Or 4 Mm Tube OD X 1 8 NPT Male

Legris 7665 04 11 Nylon Air Flow Control Valve 90 Degree Elbow Meter Out External Screw Knob 5 32 Or 4 Mm Tube OD X 1 8 NPT Male. Knobbed adjustment screw for outlet-side air flow control. The banjo body has a female push-to-connect tubing end and the housed nickel-plated fitting has a male National Pipe Taper (NPT) thread. Maximum operating pressure of 145 psi. The company, founded in 1918, is headquartered in Cleveland, OH. Control valves sometimes either a ball cone (which utilizes a spring-loaded ball seated against a cone-shaped interior surface to block the flow) or a swing check valve (which has a movable disc on a hinge to block reverse flow). The adjustment moves a disc toward or away from the center of the valve to act as a plug to restrict or open the flow path, depending on screw adjustments. Flow control valve for connecting tubing to a female threaded connection at a 90-degree angle. Flow control valves are used in various applications, including machine tools, airplane and truck controls, and automated production lines. This Parker Legris 7665 series flow control valve is housed in a banjo-style body with a 90-degree angle and is suitable for use in metering outlet air flow in pneumatic applications. Male NPT threaded connection on one end and push-to-connect female receiver on the other. Nylon banjo-style body for resistance to impact and nickel-plated brass threaded fitting for resistance to corrosion. The nylon banjo body is impact-resistant, the nickel-plated brass threaded fitting is corrosion-resistant, and the nitrile butadiene rubber (NBR) O-ring is resistant to oil and chemicals. This air flow control valve is suitable for use in pneumatic applications such as in laboratories, food and beverage processing, and paint and printing industries. They have two ports and adjustment screws to restrict or direct flow through the valves. Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. Flow control valves manage the flow of air, water, or other fluids between pipes, tubes, or hoses. A knobbed screw with a locking nut is used to adjust air flow on the outlet side. It has a maximum operating pressure of 145 pounds per square inch (psi) and a working temperature range of 32 to 158 degrees The valve complies with the Council of the European Union 2006 / 42 / EC directive and the Pressure Equipment Directive (PED) 97 / 23 / EC standards for safety and complies with Reduction of Hazardous Substances (Ro HS) regulations.

General Tools WDCFM8912 Airflow Meter Deluxe Kit

General Tools WDCFM8912 Airflow Meter Deluxe Kit
General Tools WDCFM8912 Airflow Meter Deluxe Kit

General Tools WDCFM8912 Airflow Meter Deluxe Kit. Air velocity 1-to-114-Feet. Range -4 to 140-Degree Fahrenheit. Air Flow CFM Temperature Meter features CFM, BTU, Temperature, Humidity, DP, FPM, MPS and Wet Bulb. Ideal for HVAC, Environment, Exhausts, Blowers. General WDCFM 8912 Digital Airflow Meter with CFM, BTU, TEMP, HUMIDITY, DP, FPM, MPS WET BULB. This air flow CFM temperature meter provides single hand airflow measurement. Single hand airflow measurement.

PEAKMETER Wind Speed Test Meter Multi Function Digital Anemometer Tachometer Air Volume Air Flow Meters PM6252A

PEAKMETER Wind Speed Test Meter Multi Function Digital Anemometer Tachometer Air Volume Air Flow Meters PM6252A
PEAKMETER Wind Speed Test Meter Multi Function Digital Anemometer Tachometer Air Volume Air Flow Meters PM6252A

PEAKMETER Wind Speed Test Meter Multi Function Digital Anemometer Tachometer Air Volume Air Flow Meters PM6252A. It has a low battery indicator. Ft / m (Feet Per Minute), 80 5900 (2.0% 50). This meter is a portable, professional measuring instrument with large-screen LCD and backlight, multi-unit switching functions. CFM: 0 to 99990 Area: 0 to 9.999 ft 2. This meter has the functions of reading hold, maximum, minimum, etc. This meter can be used for hand-held or fixed measurement. PM 6252 A Air Velocity M / s (Meter Per Second), 0.4 30 (2.0% 50) Ft / m (Feet Per Minute), 80 5900 (2.0% 50) Km / h (Kilometer Per Hour), 1.4 108 (2.0% 50) Mile / h (Mile Per Hour), 0.9 67 (2.0% 50) Knots (Nautical Miles Per Hour), 0.8 58 (2.0% 50) Air Flow CFM: 0 to 99990 Area: 0 to 9.999 ft 2 CMM: 0 to 99990 Area: 0 to 9.999 m 2 CMS: 0 to 9999 Area: 0 to 9.999 m 2 Flow Area Setting: yes Max / Min Function: yes Display Back Light: yes Auto Power Off: yes Low Battery Indication: Yes Power Supply: 9 V 6 F 22 Battery (Not. CMM: 0 to 99990 Area: 0 to 9.999 m 2. CMS: 0 to 9999 Area: 0 to 9.999 m 2.

KING INSTRUMENT 74C214G02122383 0 18SCFH AIR FLOW METER D586747

KING INSTRUMENT 74C214G02122383 0 18SCFH AIR FLOW METER D586747
KING INSTRUMENT 74C214G02122383 0 18SCFH AIR FLOW METER D586747

KING INSTRUMENT 74C214G02122383 0 18SCFH AIR FLOW METER D586747. KING INSTRUMENT 74 C 214 G 02122383 0-18 SCFH AIR FLOW METER D 586747.

Respirator Flow Meter For Supplied Air Systems

Respirator Flow Meter For Supplied Air Systems
Respirator Flow Meter For Supplied Air Systems

Respirator Flow Meter For Supplied Air Systems. Attaches to quick connector on end of air hose. Lens Covers for hood, pack of 20. Supplied fresh air respirator turbine breathing pump. 25 Air Hose for use with supplied air system. Respirator flow meter for supplied air systems, measures output of air flow in CFM. Hold vertically to measure / set air flow.

Legris 7660 03 09 Nylon Air Flow Control Valve 90 Degree Elbow Meter Out External Screw Knob 3 Mm Tube OD X M3 Metric Male

Legris 7660 03 09 Nylon Air Flow Control Valve 90 Degree Elbow Meter Out External Screw Knob 3 Mm Tube OD X M3 Metric Male
Legris 7660 03 09 Nylon Air Flow Control Valve 90 Degree Elbow Meter Out External Screw Knob 3 Mm Tube OD X M3 Metric Male

Legris 7660 03 09 Nylon Air Flow Control Valve 90 Degree Elbow Meter Out External Screw Knob 3 Mm Tube OD X M3 Metric Male. They have two ports and adjustment screws to restrict or direct flow through the valves. Nylon banjo-style body for resistance to impact and nickel-plated brass threaded fitting for resistance to corrosion. This Parker Legris 7660 series flow control valve is housed in a banjo-style body with a 90-degree angle and is suitable for use in metering outlet air flow in pneumatic applications. The company, founded in 1918, is headquartered in Cleveland, OH. Flow control valves are used in various applications, including machine tools, airplane and truck controls, and automated production lines. The nylon banjo body is impact-resistant, the nickel-plated brass threaded fitting is corrosion-resistant, and the nitrile butadiene rubber (NBR) O-ring is resistant to oil and chemicals. Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. This air flow control valve is suitable for use in pneumatic applications such as in laboratories, food and beverage processing, and paint and printing industries. The banjo body has a female push-to-connect tubing end and the housed nickel-plated fitting has a male metric thread with a sealing O-ring. A knobbed screw with a locking nut is used to adjust air flow on the outlet side. Flow control valve for connecting tubing to a female threaded connection at a 90-degree angle. The adjustment moves a disc toward or away from the center of the valve to act as a plug to restrict or open the flow path, depending on screw adjustments. Flow control valves manage the flow of air, water, or other fluids between pipes, tubes, or hoses. Knobbed adjustment screw for outlet-side air flow control. Maximum operating pressure of 145 psi. Metric male threaded connection with O-ring on one end and push-to-connect female receiver on the other. Control valves sometimes either a ball cone (which utilizes a spring-loaded ball seated against a cone-shaped interior surface to block the flow) or a swing check valve (which has a movable disc on a hinge to block reverse flow). It has a maximum operating pressure of 145 pounds per square inch (psi) and a working temperature range of 32 to 158 degrees The valve complies with the Council of the European Union 2006 / 42 / EC directive and the Pressure Equipment Directive (PED) 97 / 23 / EC standards for safety and complies with Reduction of Hazardous Substances (Ro HS) regulations.

CPS ABM 200 Airflow And Environmental Meter

CPS ABM 200 Airflow And Environmental Meter
CPS ABM 200 Airflow And Environmental Meter

CPS ABM 200 Airflow And Environmental Meter. Manufactured by CPS products, Inc. Bluetooth SMART (also known as Bluetooth le / low energy) connects over 20 times faster than traditional Bluetooth devices without a complicated pairing process and uses a fraction of the power for long battery life. The ABM-200 connects seamlessly and immediately to smartphones and tablets utilizing Bluetooth SMART technology. Onscreen guidance that makes it easy to take accurate readings. The ABM-200 airflow environmental meter has all of the features of the extremely popular abm-100 Plus it is Wireless and also has temperature, humidity, and pressure sensors. Free app that connects the meter to your smartphone. AAB EXP-64 Extension Pole, Extra Long Reinforced 18", 64", Rugged Grip and 1 / 4", 20 Universal Mount. These additional sensors give the meter the ability to accurately measure and record. The Wireless ABM-200 can be attached to our exp-64 64 inch aluminum extension pole separately) to take readings without having to go up a ladder. Ruggedized housing with 1 / 4 inch.

Airead M3 Industrial Grade Real Time Air Quality Monitor PM 2 5 CO2 Temp Hum Multi Tester High Accuracy Laser Sensor Indoor Air Composition Detector Meter Reader

Airead M3 Industrial Grade Real Time Air Quality Monitor PM 2 5 CO2 Temp Hum Multi Tester High Accuracy Laser Sensor Indoor Air Composition Detector Meter Reader
Airead M3 Industrial Grade Real Time Air Quality Monitor PM 2 5 CO2 Temp Hum Multi Tester High Accuracy Laser Sensor Indoor Air Composition Detector Meter Reader

Airead M3 Industrial Grade Real Time Air Quality Monitor PM 2 5 CO2 Temp Hum Multi Tester High Accuracy Laser Sensor Indoor Air Composition Detector Meter Reader. High accuracy reader - the test accuracy is improved significantly by the newly designed air in-flow path. Besides that, a magnetic shield is also built around laser sensor to block electric charge interference to ensure the stability of the testing results. Multiple index testing - Ai Read will tell users the Real time PM 2.5 / PM 1.0 / PM 10, CO 2, temperature, and humidity level at the same time with one single. Hardware upgrade - 4.7 LCD color display with user friendly interface, easy to operate, 2000 m Ah battery capacity. Ai Read air quality meter. 1200 W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. bayite Temperature Controller BTC 201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110 V - 240 V 10 A. i Power GLFANXCONTROL Exhaust Variable Speed Adjuster for Duct Inline Fan Vent Blower, HVAC Controls, 350 W, Black. Control. Inkbird ITC-308 Max. General Tools MMD 7 NP Moisture Meter, Pinless, Digital LCD with Tricolor Bar Graph.

Dwyer Rate Master Series RM Flowmeter 10 Scale Range 100 1000 SCFH Air With Stainless Steel Valve

Dwyer Rate Master Series RM Flowmeter 10 Scale Range 100 1000 SCFH Air With Stainless Steel Valve
Dwyer Rate Master Series RM Flowmeter 10 Scale Range 100 1000 SCFH Air With Stainless Steel Valve

Dwyer Rate Master Series RM Flowmeter 10 Scale Range 100 1000 SCFH Air With Stainless Steel Valve. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow. The company, founded in 1931, is headquartered in Michigan City, IN. Dwyer Rate-Master series RMC flowmeter Mounting hardware Instructions. Models are available for measuring air flow in scfm or scfh. The body is mounted to a stainless steel back bone with welded pipe thread inserts to absorb piping torque during installation. Black scale graduations are marked along both sides of the flow tube for distinct readings. An integral flow guide stabilizes the float throughout the range for consistent readings. Made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. Hot-wire anemometers calculate air velocity by measuring the change in electrical resistance as air flow cools a heated wire. The scale is epoxy-coated brushed aluminum with black graduations marked along both sides of the flow tube for distinct readings. Accuracy of or - 2% of full scale for precise readings. Cup and vane anemometers calculate air velocity based on the number of rotations of the cups or vane. The flowmeter is made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. Integral flow guide stabilizes the float throughout the range for consistent readings. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. or fpm), knots, miles per hour (mph), and kilometers per hour (km / h). The most common types of anemometer are cup, vane, hot-wire, and Pitot tube. The Dwyer Rate-Master series RMC flowmeter is a 10", scale air flow meter that has 1 / 2", female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of or 2% of full scale for precise readings. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other length 10", Accuracy or 2% of full scale Connections 1 / 2", female NPT inlet and outlet Pressure rating 100 psi / 6.9 bar Temperature rating 54 degrees C / 130 degrees FWetted materials Body: polycarbonate; O-ring: Buna-N and neoprene; metal parts: stainless steel or brass (for models with brass valve), float (varies by range), black glass, nickel / copper alloy, stainless steel, or tungsten carbide Dimensions (H x W x D) 39.05 x 5.72 x 6.35 mm / 15-3 / 8 x 2-1 / 4 x 2-1 / 2 inches Weight 1, 105.6 g / 39 oz. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within ducts. In addition to air velocity, anemometers may measure wind direction, air pressure, air flow volume, air temperature, humidity, light, and other properties. Pitot tube anemometers measure air pressure within a tube and calculate air velocity based on the difference in pressure between the air inside and outside of the tube. Many anemometers have digital readouts and can display air velocity readings in different units of measure, such as meters per second (m / s), feet per minute (ft. Dwyer Instruments manufactures measurement and control instruments, including pressure gauges, flow meters, level instrumentation, temperature instrumentation, and air quality monitors. 10", scale flowmeter with 1 / 2", female NPT connections for inline monitoring and measuring air flow.

Dwyer Mini Master Flowmeter MMA 25 4 Accuracy Of Full Scale 5 50 LPM Air

Dwyer Mini Master Flowmeter MMA 25 4 Accuracy Of Full Scale 5 50 LPM Air
Dwyer Mini Master Flowmeter MMA 25 4 Accuracy Of Full Scale 5 50 LPM Air

Dwyer Mini Master Flowmeter MMA 25 4 Accuracy Of Full Scale 5 50 LPM Air. A bottom clip for stand up mounting is also provided. MANUFACTURER DIRECT. The standard Model MMA flowmeter is suitable for both gas and liquid applications. Connect to rigid tubing with double compression fitting. It can be configured by the user with the parts provided to have non-removable top or bottom from mounted metering valves or no valve at all. The transparent nylon material provides high chemical resistance, low moisture absorption and is transparent to facilitate routine inspection. Offering advanced features at low cost, the Dwyer Series MM flowmeters are ideal for a wide range of OEM and user application in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, cabinet purging, etc. Service: Compatible gases and liquids. Using the assembly key provided, the flowmeter can be disassembled anytime for cleaning or reconfiguration. Wetted Materials: Body: Nylon 12; O-rings: Buna-N (optional materials available), Float: Black glass, K Monel, Stainless Steel, Tungsten Carbide. Temperature Limit: 130 F (54 C), Pressure Limit: 100 psi (6.9 bar) with compression fitting. In OEM quantities, ultrasonically welded caps or interchangeable mole cores enable production of the MMA flowmeter with a low profile or flat front surface where no valve is required. The MMA is practically unbreakable, mounts easily, and is easy to read. 50 psi (3.4 bar) with tubing clamp. Two 5 / 16", OD mounting-connection tubes permit quick push-on connection of rubber or plastic tubing. Despite its compactness, the MMA flowmeter features a 2", scales which combined with precision molding, enables highly repeatable readings to be made to within 4% accuracy. Process Connection: 5 / 16", OD for push on rubber or plastic tubing with provided spring tubing clamp.

Dwyer Rate Master Series RM Flowmeter 2 Scale Range 2 25 LPM Air

Dwyer Rate Master Series RM Flowmeter 2 Scale Range 2 25 LPM Air
Dwyer Rate Master Series RM Flowmeter 2 Scale Range 2 25 LPM Air

Dwyer Rate Master Series RM Flowmeter 2 Scale Range 2 25 LPM Air. Made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. The scale is epoxy-coated brushed aluminum with black graduations marked along both sides of the flow tube for distinct readings. The most common types of anemometer are cup, vane, hot-wire, and Pitot tube. Cup and vane anemometers calculate air velocity based on the number of rotations of the cups or vane. Hot-wire anemometers calculate air velocity by measuring the change in electrical resistance as air flow cools a heated wire. or fpm), knots, miles per hour (mph), and kilometers per hour (km / h). Models are available for measuring air flow in scfh, lpm, or cc / min. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow, or with a top-mounted valve for vacuum applications. The flowmeter is made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. An integral flow guide stabilizes the float throughout the range for consistent readings. The company, founded in 1931, is headquartered in Michigan City, IN. Accuracy of or - 4% of full scale. Black scale graduations are marked along both sides of the flow tube for distinct readings. Dwyer Rate-Master series RMA flowmeter Mounting hardware Instructions. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. The body is mounted to a stainless steel back bone with welded pipe thread inserts to absorb piping torque during installation. Integral flow guide stabilizes the float throughout the range for consistent readings. The Dwyer Rate-Master series RMA flowmeter is a 2", scale air flow meter with 1 / 8", female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of or 4% of full scale. length 2", Accuracy or 4% of full scale Connections 1 / 8", female NPT inlet and outlet Pressure rating 100 psi / 6.9 bar Temperature rating 54 degrees C / 130 degrees FWetted materials Body: polycarbonate; O-ring: Buna-N and neoprene; metal parts: stainless steel or brass (for models with brass valve), float (varies by range), black glass, nickel / copper alloy, stainless steel, or tungsten carbide Dimensions (H x W x D) 12.22 x 2.54 x 3.02 mm / 4-13 / 16 x 1 x 1-3 / 16 inches Weight 113.4 g / 4 oz. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within ducts. In addition to air velocity, anemometers may measure wind direction, air pressure, air flow volume, air temperature, humidity, light, and other properties. Pitot tube anemometers measure air pressure within a tube and calculate air velocity based on the difference in pressure between the air inside and outside of the tube. Many anemometers have digital readouts and can display air velocity readings in different units of measure, such as meters per second (m / s), feet per minute (ft. Dwyer Instruments manufactures measurement and control instruments, including pressure gauges, flow meters, level instrumentation, temperature instrumentation, and air quality monitors. 2", scale flowmeter with 1 / 8", female NPT connections for inline monitoring and measuring air flow.

Legris 7061 08 13 Nylon Air Flow Control Valve 90 Degree Elbow Meter In Knob 8 Mm Tube OD X 1 4 BSPP Male

Legris 7061 08 13 Nylon Air Flow Control Valve 90 Degree Elbow Meter In Knob 8 Mm Tube OD X 1 4 BSPP Male
Legris 7061 08 13 Nylon Air Flow Control Valve 90 Degree Elbow Meter In Knob 8 Mm Tube OD X 1 4 BSPP Male

Legris 7061 08 13 Nylon Air Flow Control Valve 90 Degree Elbow Meter In Knob 8 Mm Tube OD X 1 4 BSPP Male. Control valves sometimes either a ball cone (which utilizes a spring-loaded ball seated against a cone-shaped interior surface to block the flow) or a swing check valve (which has a movable disc on a hinge to block reverse flow). The body has a male British Standard Pipe Parallel (BSPP) fitting at one end and a push-to-connect female receiver at the other. A knobbed screw is used to adjust air flow on the inlet side. Maximum operating pressure of 145 psi. This Parker Legris 7061 series flow control valve is housed in a nylon body and is suitable for use in metering directional air flow in pneumatic applications. Male BSPP threaded connection on one end and push-to-connect female receiver on the other. Flow control valves manage the flow of air, water, or other fluids between pipes, tubes, or hoses. The nylon body is impact-resistant, the nickel-plated brass valve parts are corrosion-resistant, and the nitrile butadiene rubber (NBR) O-ring is resistant to oil and chemicals. Flow control valve for connecting tubing to a female threaded connection at a 90-degree angle. This air flow control valve is suitable for use in pneumatic applications such as in laboratories, food and beverage processing, and paint and printing industries. Knobbed adjustment screw for inlet-side air flow control. The adjustment moves a disc toward or away from the center of the valve to act as a plug to restrict or open the flow path, depending on screw adjustments. They have two ports and adjustment screws to restrict or direct flow through the valves. Polymer banjo-style body for resistance to impact and nickel-plated brass threaded fitting for resistance to corrosion. The company, founded in 1918, is headquartered in Cleveland, OH. Flow control valves are used in various applications, including machine tools, airplane and truck controls, and automated production lines. Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. It has a maximum operating pressure of 145 pounds per square inch (psi) and a working temperature range of 32 to 158 degrees The valve complies with the Council of the European Union 2006 / 42 / EC directive and the Pressure Equipment Directive (PED) 97 / 23 / EC standards for safety and complies with Reduction of Hazardous Substances (Ro HS) regulations.

Cole Parmer Acrylic Flowmeter W Valve For Air Brass 8 5 LPM

Cole Parmer Acrylic Flowmeter W Valve For Air Brass 8 5 LPM
Cole Parmer Acrylic Flowmeter W Valve For Air Brass 8 5 LPM

Cole Parmer Acrylic Flowmeter W Valve For Air Brass 8 5 LPM. Easily disassembly meters for cleaning. Material (housing), acrylic. Accuracy: 5 percent full-scale. Flowmeters feature a stable, easy-to-read Float. Designed for labs and plant processes where multiple gases are used English and metric scales. Meters without valves can be panel mounted or used in partial or full in-line mounted configurations. Material (fitting), brass. Meters are offered with or without built-in low hysteresis needle valves. Versatile acrylic flowmeters are designed specifically for air, oxygen, nitrogen, carbon dioxide, Argon, Helium, or water.