Best 21 Anchor Wedge Screws

19 Jul 2019

CONFAST 3 4 X 5 Strike Anchor 20 Per Box

CONFAST 3 4 X 5 Strike Anchor 20 Per Box
CONFAST 3 4 X 5 Strike Anchor 20 Per Box

CONFAST 3 4 X 5 Strike Anchor 20 Per Box. FOR CONCRETE ONLY-Provides consistent holding values. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. CAN SET EMBEDMENT DEPTH-Affords uniformity and consistent look after the anchors are set. Environment The anchor is designed for use in a Dry environment. Applications The anchor is made from Carbon Steel, and is Yellow Zinc. POSITIVE DRIVE-Use a hammer to drive the nail to expand the anchor. YELLOW ZINC PLATING-Helps prevent rusting in dry environments. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Hole Diameter / Bit Diameter The anchor requires a 3 / 4", hole to be drilled in the base material (Concrete only). Diameter of Anchor The diameter of the anchor is 3 / 4". Length Anchor The length of the anchor is 5", Minimum Embedment The minimum anchor embedment into the concrete is 3". Therefore, the anchor must be installed so that a minimum of 3", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1 / 4". This will ensure that the minimum embedment of 3", will be met. The 3 / 4", diameter anchor requires the hole in the fixture to be 7 / 8". Spacing between Anchors Each anchor must be spaced a minimum distance of 7-1 / 2", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 3-3 / 4", from an unsupported edge of the concrete.

CONFAST American Made 1 X 6 Zinc Plated Wedge Anchor 5 Per Box

CONFAST American Made 1 X 6 Zinc Plated Wedge Anchor 5 Per Box
CONFAST American Made 1 X 6 Zinc Plated Wedge Anchor 5 Per Box

CONFAST American Made 1 X 6 Zinc Plated Wedge Anchor 5 Per Box. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. ZINC PLATED - Helps prevent rust in dry environments. HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation. WIDE RANGE OF SIZES - Insures proper fastener for best results. Environment The anchor is designed for use in a Dry environment. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. Hole Diameter / Bit Diameter The anchor requires a 1", hole to be drilled in the base material (Concrete only). Diameter of Anchor The diameter of the anchor is 1". Length Anchor The length of the anchor is 6", Thread Length The length of the threads on the anchor is 2-1 / 2", in length. Minimum Embedment The minimum anchor embedment into the concrete is 4-1 / 2". Therefore, the anchor must be installed so that a minimum of 4-1 / 2", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1 / 2". This will ensure that the minimum embedment of 4-1 / 2", will be met. The 1", diameter anchor requires the hole in the fixture to be 1-1 / 4". Spacing between Anchors Each anchor must be spaced a minimum distance of 10", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 5", from an unsupported edge of the concrete.

Simpson Strong Tie THD37300H4SS 304 Stainless Steel Titen HD Screw Anchor 3 8 By 3 Pack Of 50

Simpson Strong Tie THD37300H4SS 304 Stainless Steel Titen HD Screw Anchor 3 8 By 3 Pack Of 50
Simpson Strong Tie THD37300H4SS 304 Stainless Steel Titen HD Screw Anchor 3 8 By 3 Pack Of 50

Simpson Strong Tie THD37300H4SS 304 Stainless Steel Titen HD Screw Anchor 3 8 By 3 Pack Of 50. Thread design undercuts to efficiently transfer the load to the base material; qualified for static and seismic loading conditions. No special drill bit required - designed to install using standard-sized ANSI tolerance drill Bits. Cost-effective solution for less extreme applications where the environment may be wet, moist or damp. Specialized heat-treating process creates tip Hardness for better cutting without compromising the ductility. Hex-washer head requires no separate washer, unless required by Code, and provides a clean installed appearance. The Titen HD offers low installation torque and outstanding performance. Designed and tested in dry, interior, non-corrosive environments or temporary outdoor applications, The Titen HD demonstrates industry-leading performance even in Seismic conditions. This high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry.

Simpson Strong Tie WA62100MG Wedge All Anchor Mechanically Galvanized 10 By 1 2 Diameter 10 Per Box

Simpson Strong Tie WA62100MG Wedge All Anchor Mechanically Galvanized 10 By 1 2 Diameter 10 Per Box
Simpson Strong Tie WA62100MG Wedge All Anchor Mechanically Galvanized 10 By 1 2 Diameter 10 Per Box

Simpson Strong Tie WA62100MG Wedge All Anchor Mechanically Galvanized 10 By 1 2 Diameter 10 Per Box. One piece wrap around clip. Most sizes feature full Thread for added versatility. Threaded end is chamfered for ease of starting Nut. Simpson strong-tie stands apart from the rest in quality and reliability. Every production run goes through rigorous testing to ensure all products can handle higher loads, resist corrosion and make installation more efficient. Simpson offers a wide variety of fasteners, accessories and tools under strong-drive structural fasteners, deck-drive Premium fasteners and quik-drive auto-feed screw driving systems.

The Hillman Group 370983 Wedge Anchor 3 8 X 2 3 4 Inch 25 Pack

The Hillman Group 370983 Wedge Anchor 3 8 X 2 3 4 Inch 25 Pack
The Hillman Group 370983 Wedge Anchor 3 8 X 2 3 4 Inch 25 Pack

The Hillman Group 370983 Wedge Anchor 3 8 X 2 3 4 Inch 25 Pack. Has various DOT approvals including Cal Trans listing for Stud Mechanical Expansion Anchors. Made of Steel / Zinc. Use in solid concrete, brick and stone. It is building code approved and can also be used with treated lumber. The Power-Stud is a torque controlled, wedge expansion anchor that is designed for concrete applications. DEWALT DW 5207 7-Piece Premium Percussion Masonry Drill Bit Set.

Powers Fastening Innovations 7248SD 1 2 Inch By 5 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Carbon Steel 25 Per Box

Powers Fastening Innovations 7248SD 1 2 Inch By 5 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Carbon Steel 25 Per Box
Powers Fastening Innovations 7248SD 1 2 Inch By 5 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Carbon Steel 25 Per Box

Powers Fastening Innovations 7248SD 1 2 Inch By 5 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Carbon Steel 25 Per Box. Easy to identify and fully removable. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits. Designed for consistent and reliable performance in cracked and untracked concrete. Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Heavy duty screw anchor with a finished hex head. Powers Fastening Innovations.

Simpson Strong Tie THD501200H 1 2 Inch By 12 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack

Simpson Strong Tie THD501200H 1 2 Inch By 12 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack
Simpson Strong Tie THD501200H 1 2 Inch By 12 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack

Simpson Strong Tie THD501200H 1 2 Inch By 12 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack. Tested per AC 193 to ensure outstanding performance in both cracked and uncracked concrete. Designed to install using standard ANSI tolerance drill bits. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications. The Titen HD anchor is a patented, high strength screw for concrete and masonry. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Specialized head treated process creates superior hardness. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. Easy post-installation inspection head stamped with anchor length in inches. Threads along the length of the anchor undercut the concrete and efficiently transfer the load to the base material.

Uxcell M10 X 90 Expansion Eyebolt Eye Nut Screw With Ring 304 Stainless Steel Anchor Raw Bolts 4 Pcs

Uxcell M10 X 90 Expansion Eyebolt Eye Nut Screw With Ring 304 Stainless Steel Anchor Raw Bolts 4 Pcs
Uxcell M10 X 90 Expansion Eyebolt Eye Nut Screw With Ring 304 Stainless Steel Anchor Raw Bolts 4 Pcs

Uxcell M10 X 90 Expansion Eyebolt Eye Nut Screw With Ring 304 Stainless Steel Anchor Raw Bolts 4 Pcs. The eye type is drop forged eye, such eye bolts are designed to attach a securing eye to a structure and then tie to ropers or cables. hole for drilling, and tight the anchor bolt with a wrench after putting the screw. It's durable and reliable. Made of premium 304 stainless steel, provides a rust protection and precise size. Total Weight: 536 g Materials: 304 Stainless Steel Application: Concrete and masonry Content: 4 x pcs M 10 x 90 Expansion Eye Bolt. Suggested a 14 mm Dia. The bolt transfers forces to the sleeve, with the expansion of sleeve, a solid connection has been built between a concrete wall and the wedge anchor nut. Fit the concrete wall or masonry, for hanging or lefting the super heavy things like a big shelf. Screw Size: M 10 Overall Length: 120 mm Eye Nut Height: 46 mm Inner diameter of the ring: 25 mm Sleeve Inner Diameter: 10 mm Sleeve Length: 60 mm Suggested Hole Size: 14 mm Dia. Standard M 10 expansion bolts with 120 mm length, and the ring Inner Diameter is 25 mm.

The Hillman Group 372160 Wedge Bolt Anchor 3 8 X 2 1 2 Inch 50 Pack

The Hillman Group 372160 Wedge Bolt Anchor 3 8 X 2 1 2 Inch 50 Pack
The Hillman Group 372160 Wedge Bolt Anchor 3 8 X 2 1 2 Inch 50 Pack

The Hillman Group 372160 Wedge Bolt Anchor 3 8 X 2 1 2 Inch 50 Pack. Wedge bolt anchors are versatile and can be used in a variety of base materials, including brick, block, concrete, and hollow block. Unlike traditional wedge or sleeve type anchors, they will not spin in the hole when attempting to tighten. Wedge-bolt anchors are removable and reusable, unlike traditional anchors, and are manufactured from heat-treated, high strength carbon steel that is plated with commercial bright zinc and a supplementary chromate treatment. Wedge-bolt anchors have specially designed dual threads that engage the base material immediately upon tightening. Wedge-bolt Anchors have specially designed dual threads that engage the base material immediately upon tightening. Unlike traditional Wedge or sleeve type Anchors, they will not spin in the hole when attempting to tighten. Wedge bolt anchors are versatile and can be used in a variety of base materials, including brick, Block, concrete, and hollow block. Powers Fastening Innovations 01316 3 / 8-Inch by 6-Inch SDS-Plus Blue Carbide Wedge-Bit, 1 Per Box.

CONFAST 1 2 X 2 3 4 Wedge Anchor Zinc Plated Box Of 25

CONFAST 1 2 X 2 3 4 Wedge Anchor Zinc Plated Box Of 25
CONFAST 1 2 X 2 3 4 Wedge Anchor Zinc Plated Box Of 25

CONFAST 1 2 X 2 3 4 Wedge Anchor Zinc Plated Box Of 25. HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. Applications The anchor is made from Carbon Steel, and is Zinc Plated. Torque Value To be set properly in the concrete, the anchor must be torqued to between 50 - 60 ft. WIDE RANGE OF SIZES - Insures proper fastener for best results. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. Environment The anchor is designed for use in a Dry environment. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. ZINC PLATED - Helps prevent rust in dry environments. Hole Diameter / Bit Diameter The anchor requires a 1 / 2", hole to be drilled in the base material (Concrete only). Diameter of Anchor The diameter of the anchor is 1 / 2". Length Anchor The length of the anchor is 2-3 / 4", Thread Length The length of the threads on the anchor is 1-1 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 2-1 / 4". Therefore, the anchor must be installed so that a minimum of 2-1 / 4", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1 / 8". This will ensure that the minimum embedment of 2-1 / 4", will be met. The 1 / 2", diameter anchor requires the hole in the fixture to be 5 / 8". Spacing between Anchors Each anchor must be spaced a minimum distance of 5", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 2-1 / 2", from an unsupported edge of the concrete.

THD50800H 1 2 X 8 Titen HD Heavy Duty Screw Anchors 20 Pk

THD50800H 1 2 X 8 Titen HD Heavy Duty Screw Anchors 20 Pk
THD50800H 1 2 X 8 Titen HD Heavy Duty Screw Anchors 20 Pk

THD50800H 1 2 X 8 Titen HD Heavy Duty Screw Anchors 20 Pk. Zinc plated, Carbon steel, heat treated. Simpson Strong-Tie THD 50800 H Titen HD Concrete Screw Anchor (Zinc) 1 / 2 x 8 (20). Simpson Strong Tie H 2.5 A 18-Gauge Hurricane Tie 100-per Box. SDS-plus Bulldog Rotary Hammer Bit. Simpson Strong Tie THD 50800 H 1 / 2-Inch by 8-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete / Masonry, 20 per Pack. x 12 In. Bosch HC 2084 1 / 2 In. Use with 1 / 2", Diameter Drill Bit. Use with 3 / 4", Wrench or Socket.

Simpson Strong Tie THDB62600H 5 8 Inch By 6 Inch Titen HD Screw Anchor 10 Per Box

Simpson Strong Tie THDB62600H 5 8 Inch By 6 Inch Titen HD Screw Anchor 10 Per Box
Simpson Strong Tie THDB62600H 5 8 Inch By 6 Inch Titen HD Screw Anchor 10 Per Box

Simpson Strong Tie THDB62600H 5 8 Inch By 6 Inch Titen HD Screw Anchor 10 Per Box. The self-undercutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Higher load capacity and vibration resistance. The Titen HD anchor is a patented, high-strength screw anchor for concrete and masonry. The high strength, easy to install Titen HD anchor has been tested and shown to provice outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. Specialized heat treating process creates superior hardness at the tip to facilitate cutting. Tested per AC 193 to ensure outstanding performance in both cracked and uncraked concrete. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. x 12 In. Simpson Strong Tie THD 50500 H 1 / 2-Inch by 5-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete / Masonry, 20 per Pack. Simpson Strong Tie THDB 62800 HMG 5 / 8-Inch by 8-Inch Mechanical Galvanized Titen HD Screw Anchor, 10 Per Box. Simpson Strong Tie ABU 66 Z Z-MAX Uplift Post Base. DEWALT DW 5446 5 / 8-Inch x 6-Inch x 8-Inch ROCK CARBIDE SDS Plus Hammer Bit. THD 50400 H 1 / 2", x 4", Titen HD Heavy Duty Screw Anchors 20 / pk. SIMPSON STRONG TIE 84012 5 / 8 X 6 Hd Titen Screw. Bosch HC 2104 5 / 8 In. Simpson Strong Tie THDB 62400 H 5 / 8-Inch by 4-Inch Titen HD Screw Anchor, 10 Per Box. Simpson Strong Tie THD 50600 H 1 / 2-Inch by 6-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete / Masonry, 20 per Pack. THD 62800 H 5 / 8", x 8", Titen HD Heavy Duty Screw Anchors 10 / pk. SDS-plus Bulldog Rotary Hammer Bit. The head is stamped with anchor length in inches.

Simpson Strong Tie STB2 252144SS Strong Bolt 2 Wedge Anchor 1 4 By 2 1 4 304SS 100 Per Box

Simpson Strong Tie STB2 252144SS Strong Bolt 2 Wedge Anchor 1 4 By 2 1 4 304SS 100 Per Box
Simpson Strong Tie STB2 252144SS Strong Bolt 2 Wedge Anchor 1 4 By 2 1 4 304SS 100 Per Box

Simpson Strong Tie STB2 252144SS Strong Bolt 2 Wedge Anchor 1 4 By 2 1 4 304SS 100 Per Box. Each segment adjusts independently. Enables clip to undercut into the concrete. This special alloy clip offers improved performance. Simpson offers a wide variety of fasteners, accessories and tools under strong-drive structural fasteners, deck-drive Premium fasteners and quik-drive auto-feed screw driving systems. Every production run goes through rigorous testing to ensure all products can handle higher loads, resist corrosion and make installation more efficient. The strong-bolt 2 anchor received classification as a category 1. Simpson strong-tie stands apart from the rest in quality and reliability. The strong-bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3 1 / 4".

1 4 20 X 3 1 4 Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated Pk 25

1 4 20 X 3 1 4 Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated Pk 25
1 4 20 X 3 1 4 Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated Pk 25

1 4 20 X 3 1 4 Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated Pk 25. allow for tolerances in dimension and shape, which can vary from lot to lot. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Anchors are used for anchoring and securing objects into drywall, concrete or brick. We also feature a full line of USA-made fasteners, including Grade 5 and Grade 8 hex cap screws, sockets, stainless products, nuts, and washers. ASMC Industrial offers a comprehensive selection industrial, automotive, and construction fasteners. Please see the in the table below for full details. Comes in many types including sleeve, drop in, wedge, and others. may differ from picture. PRODUCT: 0000-116817 Fastener Type: Wedge Anchor Size 1 / 4", 20 x 3 1 / 4", Diameter / Nominal Size: 1 / 4", Length: 3 1 / 4", Thread Pitch: 20 Thread Pitch Type: Coarse Thread Direction: Right System of Measurement: Inch Material: Low Carbon Steel Finish: Zinc Plated Drive Type: External Hex Average Piece Weight: 0.0565000 lbs. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc.

Simpson Strong Tie THD37600H 3 8 Inch By 6 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 50 Per Pack

Simpson Strong Tie THD37600H 3 8 Inch By 6 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 50 Per Pack
Simpson Strong Tie THD37600H 3 8 Inch By 6 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 50 Per Pack

Simpson Strong Tie THD37600H 3 8 Inch By 6 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 50 Per Pack. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Designed to install using standard ANSI tolerance drill bits. The Titen HD anchor is a patented, high strength screw for concrete and masonry. Tested per AC 193 to ensure outstanding performance in both cracked and uncracked concrete. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. Specialized head treated process creates superior hardness. Simpson Strong Tie THD 50800 H 1 / 2-Inch by 8-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete / Masonry, 20 per Pack. Simpson Strong Tie THD 37600 H 3 / 8", x 6", Titen HD Heavy Duty Screw Anchor for Concrete / Masonry 50 per Box. Easy post-installation inspection head stamped with anchor length in inches. Threads along the length of the anchor undercut the concrete and efficiently transfer the load to the base material.

Simpson Strong Tie THD50800H 1 2 Inch By 8 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack

Simpson Strong Tie THD50800H 1 2 Inch By 8 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack
Simpson Strong Tie THD50800H 1 2 Inch By 8 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack

Simpson Strong Tie THD50800H 1 2 Inch By 8 Inch Titen HD Zinc Plated Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. Tested per AC 193 to ensure outstanding performance in both cracked and uncracked concrete. Designed to install using standard ANSI tolerance drill bits. Specialized head treated process creates superior hardness. The Titen HD anchor is a patented, high strength screw for concrete and masonry. Ridgid VF 3502 High Efficiency, Dry Pickup Dust Bags for 12 - 16 Gallon Ridgid Wet / Dry Vacuums (2 Pack). SDS-plus Bulldog Rotary Hammer Bit. x 12 In. Simpson Strong Tie THD 50600 H 1 / 2-Inch by 6-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete / Masonry, 20 per Pack. Bosch HC 2084 1 / 2 In. Simpson Strong Tie THD 501200 H Titen HD Heavy Duty Concrete Screw Anchor (Zinc) 1 / 2", x 12", (5 / bx). Simpson Strong Tie DS 83938 Predeflected Holdown, 1 Each. Simpson Strong Tie THD 50400 H 1 / 2-Inch by 4-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete / Masonry, 20 per Pack. Simpson Strong Tie THD 37600 H 3 / 8-Inch by 6-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete / Masonry, 50 per Pack. THD 50800 H 1 / 2", x 8", Titen HD Heavy Duty Screw Anchors 20 / pk. Easy post-installation inspection head stamped with anchor length in inches. Threads along the length of the anchor undercut the concrete and efficiently transfer the load to the base material.

The Hillman Group 370982 Wedge Anchor 3 8 X 2 4 Inch 25 Pack

The Hillman Group 370982 Wedge Anchor 3 8 X 2 4 Inch 25 Pack
The Hillman Group 370982 Wedge Anchor 3 8 X 2 4 Inch 25 Pack

The Hillman Group 370982 Wedge Anchor 3 8 X 2 4 Inch 25 Pack. For use in concrete, stone, brick, and block. Steel / zinc-plated. Power fasteners power stud anchor. Drill hole same diameter as anchor. For use in concrete, stone, brick, and Block. Ideal for medium to heavy-duty loads. Exact hole depth is not required.

Antrader 12 Pack 304 Stainless Steel Wedge Anchor Expansion Bolt Screws Sleeve Anchors Silver Tone M6 X 60Mm

Antrader 12 Pack 304 Stainless Steel Wedge Anchor Expansion Bolt Screws Sleeve Anchors Silver Tone M6 X 60Mm
Antrader 12 Pack 304 Stainless Steel Wedge Anchor Expansion Bolt Screws Sleeve Anchors Silver Tone M6 X 60Mm

Antrader 12 Pack 304 Stainless Steel Wedge Anchor Expansion Bolt Screws Sleeve Anchors Silver Tone M6 X 60Mm.

Sia Wood Anchor 4 Pack

Sia Wood Anchor 4 Pack
Sia Wood Anchor 4 Pack

Sia Wood Anchor 4 Pack. fix stripped screw holes in all types of WOOD. We are dedicated to give everyone the very best houseware products for all home needs with a focus on dependability our client satisfaction and great quality We provide highquality modern products to be enjoyed by many clients Features. Screw It Again EMW 5953260. Grip Screw Hole Repair Kit, Steel, Pack of 1. King's Original Stripped Hole Repair Kit for Doors More 3 / 8 Size Natural Color Plastic Dowel System Permanently Fix Damaged Screw Holes in All Wood Types. Woodmate 2498 Mr.

Simpson Strong Tie THD50500HMG 1 2 Inch By 5 Inch Titen HD Mechanically Galvanized Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack

Simpson Strong Tie THD50500HMG 1 2 Inch By 5 Inch Titen HD Mechanically Galvanized Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack
Simpson Strong Tie THD50500HMG 1 2 Inch By 5 Inch Titen HD Mechanically Galvanized Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack

Simpson Strong Tie THD50500HMG 1 2 Inch By 5 Inch Titen HD Mechanically Galvanized Heavy Duty Screw Anchor For Concrete Masonry 20 Per Pack. Specialized head treated process creates superior hardness. Tested per AC 193 to ensure outstanding performance in both cracked and uncracked concrete. Mechanically Galvanized meets ASTM B 695, Class 65, Type It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications. Designed to install using standard ANSI tolerance drill bits. The Titen HD anchor is a patented, high strength screw for concrete and masonry. Easy post-installation inspection head stamped with anchor length in inches. Threads along the length of the anchor undercut the concrete and efficiently transfer the load to the base material.

Simpson Strong Tie WA624124SS Wedge All Anchor 304SS 4 1 2 By 5 8 Diameter 20 Per Box

Simpson Strong Tie WA624124SS Wedge All Anchor 304SS 4 1 2 By 5 8 Diameter 20 Per Box
Simpson Strong Tie WA624124SS Wedge All Anchor 304SS 4 1 2 By 5 8 Diameter 20 Per Box

Simpson Strong Tie WA624124SS Wedge All Anchor 304SS 4 1 2 By 5 8 Diameter 20 Per Box. One piece wrap around clip. Simpson offers a wide variety of fasteners, accessories and tools under strong-drive structural fasteners, deck-drive Premium fasteners and quik-drive auto-feed screw driving systems. Every production run goes through rigorous testing to ensure all products can handle higher loads, resist corrosion and make installation more efficient. Threaded end is chamfered for ease of starting Nut. Most sizes feature full Thread for added versatility. Simpson strong-tie stands apart from the rest in quality and reliability.